Grove - LCD display 2x16 characters with backlight (White on Blue)

Product description: 2x16 I2C LCD display with backlight (White on Blue)

Monochrome 2 x 16 character LCD display withhigh brightness backlight from Grove. The module communicates with the control board via the two-row I2C bus. The screen is poweredfrom 3.3 V to 5 V.

Traditional LCD displays requireup to 10 free I/O pins onthe control board and screens with RGB backlighting require three additional pins to control the backlighting colour. This is a limitation for those who use a programming board with fewer pins such as Arduino, Raspberry Pi.With the Grove connector, only two signal pins and 2 power pins are required, just connect the module to the I2C interface inSeeeduino, RaspberryPi orArduinousingthe Grov cable.

Features and applications of the Grove module with monochrome display

• Display of 2 lines of 16 characters each
• Display mode STN (yellow green)
• Built-in MCU
• I2C interface
• Support for English and Japanese fonts
• It is used in displays for thermometers, clocks and other projects requiring simple display.

Monochrome 2X16 I2C LCD display with backlighting.

User guide available under thislink. Technical specifications of Grove module with display Parameter Scope Operating voltage 3.3 V to 5 V Working temperature From 0℃ to 50℃ Storage temperature From -10℃to 60℃ Interface I2C I2C address 0X3E Dimensions 40 mm x 80 mm x 13 mm Mass 42.9 g Useful links

• Manufacturer's side with the product
• The Wiki page
• Grove-LCD RGB backlight library
• Technical Specification JDH_1804
• Blog Seeedstudio
• Grove module selection guide