Filament Rosa3D Flex 85A 1,75mm 0,5kg - White

Бестселлер

Артикул:: 57515091

Filament Rosa3D Flex 85A 1,75mm 0,5kg - White

Нет в наличии

Бренд Rosa3D

Сроки доставки указаны ориентировочно и зависят от региона доставки. Подробнее на этой странице

Характеристики

Диаметр нити накала: 1.75 mm

Вес и размеры

Вес: 0.5 кг

Дизайн

Цвет: Белый

Материал

Материал нити накала: ТПУ

Прочие свойства

Бренд: Rosa3D

Описание

Product description: Filament Rosa3D Flex 85A 1.75 mm 0.5 kg - White

Filament Flex 85A is a thermoplastic polyurethane (TPU) in white , designed for 3D printers working in FFF / FDM technology. The material was pre-wound on a spool and vacuum-packed. The filament diameter is 1.75 mm . The material intended for technical applications, thanks to its flexibility and excellent interlayer adhesion, is suitable for applications where mechanical resistance and tensile strength are required. The filament is resistant to grease, oils and many solvents.

In our offer of filaments you will also find other materials and colors.

Filament Rosa3D Flex 85A 1.75 mm 0.5 kg - White.

Main features of Flex 85A material

Chemical resistance
Flexibility
Odorless
Tensile strength

Practical application of the Flex 85A filament

Smartphone cases
Parts for drones and RC cars
Seals and covers
Device housings

The filament does not require a heated table or chamber
In case of problems with adhesion, we recommend the use of an adhesive
It is recommended to cool the printout
It is recommended to start slowly and gradually increase the printing speed

Suggested filament printing parameters Printing temperature 215 ° C to 250 ° C Table temperature 30 ° C to 60 ° C Recommended print cooling 50% to 100% Recommended print speed 15 to 50 mm / sec Compatible work tables Glass, smooth PEI, textured PEI, aluminum Due to the differences in the design of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally.

Sample printout from Flex 85A filament.

Technical specification and physical properties of the filament Parameter Range Filament diameter 1.75 mm Filament dimensional tolerance +/- 0.05 mm Colour White Printing temperature 215 ° C to 250 ° C Recommended print speed From 30 to 60 mm / s Spool - material Flex 85A (TPU) Spool diameter 200 mm Spool width 55 mm Mounting hole diameter 52 mm Desiccant Yes Vacuum packing Yes Material density 1.18 g / cm 3 Tensile strength at break 35 MPa Tensile elongation 520% Print speed 15 to 50 mm / s Net weight 0.5 kg

If there are problems with the extrusion of the filament, you should:

Loosen the screw that adjusts the level of pressure of the knurl against the roller
Reduce the printing speed
Install a Teflon tube sealing the filament feeding path

Useful links