Tinycontrol GSMKON-040 - GSM v4.2 controller - digital I/O / 1-wire / I2C

A small GSM controller configured via a website, similar to aLANcontroller.For proper operation, aSIM cardmust be inserted in the device.The configuration page usesMQTT protocol to communicate with the device. If the SIM card does not allow access to the Internet, we will inform you in the installation procedure how to change the device settings viaSMS.GSM controller is equipped with 1-wire and I2C digital inputs, analogue inputs, serial bus, logical inputs and relay. The device is poweredfrom 5 V to 55 V.

GSM controller V4.2.

• Control by making a voice call from an authorized number (the controller will switch on the controller and e.g. open the gate)
• Control and receipt of information via SMS
• Controlling and receiving data by the server via MQTT
• Locally using the conditions set on the device, e.g. to switch on the output depending on the sensor reading

The GSM controller can work inall modessimultaneously.

Manufacturer provides its proprietary solution mqtt.ats.pl, which allows you to easily configure a GSM controller, and has a package of services complementing the functionality of Tinycontrol devices based on the MQTT protocol. The service offers such functions as:

• Collecting data from devices and presenting them on a chart or table
• Defining relationships between sensors and devices
• Setting the work schedule
• View and control data from supported devices using a website or mobile application

GSM controller control.

• Supply voltage: 5 V to 55 V
• Power consumption: 0.2 W (temporary 5 W)
• Relay: 125 VAC / 3 A
• Antenna: SMA connector
• SIM card: nano SIM
• I/O:
  • 2 analogue inputs: 0 to 5 V and 0 V to 33 V, for voltage, DC, temperature sensors, photoresistors, pressure sensors and much more
  • 1-Wire digital input - up to 8 DS18B20 probes
  • I2C digital input
  • UART 3.3 V serial bus
  • 2 logical inputs
  • 1 relay (NO, C, NC)
  • measuring supply voltage and temperature on the board
• Configuration via website
• Handling of commands and SMS notifications
• Change of output status by making a call from an authorized number
• Support for up to 100 numbers authorised for ringing functions
• Support for HTTP (GET) and MQTT communication protocols
• Operating temperature range: -20°C to 55°C
• Dimensions: 69 x 40 x 29 mm (without DIN base and antenna)
• Weight: 56 g

• GSM controller in a housing
• DIN mounting base
• Omnidirectional antenna, 2 dB gain
• 30 cm power cable with a 2 mm plug
• Brief instruction

Content of the GSM controller set.

• Manufacturer's website