Graphic color display TFT LCD 1,8'' 128x160px + microSD reader - SPI - SparkFun LCD-15143

LCD TFT graphic display from SparkFun. The screen has a diagonal of 1.8 " , a resolution of 128 x 160 px and an 18-bit color depth. The communication device uses the SPI bus. It works with a voltage of 3.3 V and 5 V. Additionally, a microSD memory card reader is placed on the module's PCB. .

1.8 '' color TFT LCD graphic display .

Presentation of the display prepared by the manufacturer .

Display module pins .

• SDCS - chip select for the SD card reader (communication with the reader in low state)
• LCDCS - chip select for the display (communication with the reader in low state)
• D / C - transmission selection pin: data / command - data / commands.
• TE - optional output used to synchronize data recording to avoid the "Tearing" effect that occurs when data is changed during screen refresh
• MISO - input data line of the SPI bus
• MOSI - the output data line of the SPI bus
• SCLK - clock line of the SPI bus
• PWM - PWM output pin
• 3V3-5V5 - supply voltage: from 3.3 V or 5 V.
• GND - the ground of the system

• Producer - Sparkfun
• Product designation: LCD-15143
• Supply voltage: 3.3 V / 5 V
• Built-in voltage regulator
• Display type: graphic, color TFT LCD
• Screen diagonal: 1.8 ''
• Display resolution: 128 x 160 px
• Color depth: 18 bit
• Communication: SPI
• Built-in slot for a microSD memory card
• Overall module dimensions: 60 x 38 x 5 mm

• Graphic color TFT LCD 1.8 '' 128x160px with a microSD reader - SPI - SparkFun LCD-15143 - 1 pc.

Display with a microSD reader - SparkFun LCD-15143 .

• Manufacturer's website - SparkFun LCD-15143
• User guide
• Diagram of the module
• Eagle files
• Arduino library