Print glue Magigoo PRO PC - for polycarbonate fibres - 50ml

Magigoo PRO PC printing adhesive - for polycarbonate fibers - 50 ml is a preparation improving the adhesion of the first 3D print layers , designed for use with polycarbonate filaments. The product improves the bonding properties between the first filament layers and the 3D printer 's worktable. Printouts may not adhere sufficiently to the printer's worktop, therefore, to avoid this type of problem, it is recommended to use Magigoo PRO PC. Remains of the adhesive agent should be removed with a damp cloth.

Magigoo PRO PC printing adhesive - 50 ml.

• Shake the bottle immediately before use.
• Apply the preparation on the printer's worktop.
• Print as recommended by the filament / printer manufacturer.
• Leave to cool and remove. The print should pop off immediately.
• Use a damp cloth to clean the worktop from residual glue.

• Type: 3D printing adhesive
• Purpose: for polycarbonate fibers
• Dosing method: dispenser with a sponge
• Color: clear, yellow
• Consistency: liquid, sticky
• Package capacity: 50 ml

Magigoo PRO PC - for polycarbonate fibers - 50 ml.

• Manufacturer's website