Pino-Tech SoilWatch 10 - analog soil moisture sensor resistant to corrosion - 1.5m

The sensor to determine the moisture level of the soil. It is powered with the voltage from 3.1 V to 5 V. The output is the analog voltage. The design of the sensor has no visible electrodes, making it resistant to corrosion and the readings over time do not lose precision. The sensor has such protection as: water resistance and resistance to atmospheric conditions. The module can be connected with the Arduino boards and the other boards equipped with the A/D converter.

• Accurate
• Easy to use
• The capacitive sensor of 75 MHz
• Waterproof and weatherproof
• Long service life than resistive humidity sensors

• Control of watering
• Monitoring the soil moisture

• The brown wire: supply voltage VCC +
• Black wire: ground GND
• White wire: output

• Supply voltage: 3.1 V to 5 V
• Output voltage: from 0 V to 3 V
• Maximum current: approx. 24 mA
• Temperature drift: typically less than 5 mV
• Working temperature: from 2 °C to 45 °C
• Dimensions: 170 x 25 x 15 mm
• Weight: 52 g
• Cable length: 1.5 m

• The website of the manufacturer of Pinot-Tech
• Documentation
• Sample Arduino program