Wide Input Shim KIT - power supply module for Raspberry Pi 3-16V

Module in a form of a hat forthe Raspberry Pi, enables to supply power to the minicomputer with voltage from 3 V to 16 V. This allows the cooperation of different power supplies with Raspbery Pi. It is small in size, so it can be soldered directly to the GPIO pins and use further hats.

Wide Input SHIM (Shove Hardware in the Middle)has a power connector 3,5 / 1,4 mm. The module is supplied with an adapter cable with a plug 5,5 / 2,1 mm and another one with wires withremoved insulation.

During the power supply, Raspberry Pi with the hat should not be connected with an additional power supply via microUSB. This can lead to damaging the Raspberry Pi.

• Supply voltage: 3 V to 16 V
• Small board: thickness 0.8 mm
• Allows the installation of other HATs and pHATs
• Built-in connector 3.5 / 1.4 mm (plus in the center)
• Two additional wires
• Built-in converterTPS630701
• Performance voltage:
  • For 3V: 1A
  • 4V: 1.5 A
  • 5V: 2 A
• Protection against reverse polarity
• Works with Raspberry Pi 3+ / 3 / 2 / B+ / Zero / Zero In
• Pin EN: turn off the system

The subject of the sale is an hat only. Raspberry Pimust be purchased separately.

• Trim Wide Input SHIM
• Connector 2x6 for self-soldering
• Cable with a plug 5,5 / 2,1 mm
• Cable with wires with removed insulation

• The website of the manufacturer Pimoroni