Touch screen - resistive LCD 3,5" 320x480px GPIO for Raspberry Pi

Product description: Touch screen - resistance LCD TFT 3.5''.

Touch screen, 3.5" resistive for RaspberryPi with320 x 480 px resolution. Works with any 40-pin version of the RaspberryPi via GPIO pins- as a minicomputer cap.

The device communicates through the GPIO pins - as a mini computer overlay.

Raspberry Pican be purchased separately.

Connecting the screen with Raspberry Pi

To run the screen, place the screen on the GPIO Raspberry Pi pins.

Example of connecting a screen with Raspberry Pi.

GPIO touch screen interface Pin GPIO Symbol Description 1, 17 3,3V Power supply 3.3 V. 2, 4 5V 5 V power supply.

3, 5, 7, 8, 10,

12,13,15,16

NC Not connected. 6, 9, 14, 20, 25 GND The weight. 11 TP_IRQ Break from the touch panel. 18 LCD_RS Selection: commands or data for the LCD panel. 19

LCD_SI/

TP_SPI

SPI interface data input for touch panel and LCD screen. 21 TP_SO SPI interface data output for the touch panel. 22

RST

Reset. 23

LCD_SCK/

TP_SCK

SPI clock signal for touch panel and LCD screen. 24 LCD_CS Chip select for LCD screen. 26 TP_CS Chip select for the touch panel. Touch screen specification

• Type: touch screen, resistive
• Diagonal: 3.5 "
• Resolution: 320 x 480 px
• SPI communication
• Works with: RaspberryPi in 4B, 3B+, 3B, 2B, B+, Zero and Zero Wversions
• Screen dimensions: 85 x 56.5 mm

The screen set includes

• 3.5" touch screen, resistive
• Stylus

Useful links

• Manufacturer's website
• Controller and instructions