Характеристики
- Напряжение от
- 5.0 V
- Напряжение до
- 3.3 V
Дизайн
- Тип
- Запчасть для микрокомпьютера
Прочие свойства
- Бренд
- OEM
Свойства
- Тип
- Аксессуары для микрокомпьютеров
Экран
- Тип экрана
- LCD TFT
- Сенсорный экран
- Нет
- Диагональ экрана
- 2.2'', 2.2''
- Разрешение экрана
- 320x240px
Описание
Product description: 2,2'' 320x240px TFT LCD graphic display - SPI
2.2"RGB TFT display with320 x 240 pxresolution. The communication module uses the SPI interface.The module's board can be easily extended with an SD memory card thanks to the appropriate slot. The display operates with a voltage range from3.3 Vto5 V,but the logical part requires3.3 V. The module dimensions are 40.1 x 67.2 mm.
Arduino compatible product
The manufacturer provides the necessarylibraries and a sample programto operate the display.
TFT LCD display.
Pin layout on the board.
Display outputs
The module can be supplied with both3.3 Vand5 V. The display uses theSPIinterface for communication. A goldpin bar has been used to output the necessary connectors, and the individual pins have been marked for easier determination of their function.
Technical specification
- Voltage: 3.3 V to 5 V
- Display resolution: 320 x 240 px
- Diagonal display: 2,2"
- Display type:TFT
- Displayed colours: RGB 65K
- Operating temperature: -20°C to 60°C
Pin
Description
VCC
Display power supply 3.3 V / 5 V.
GND
The weight of the system.
CS
Device selection - chip select for display (switched on at low state)
RESET
Reset signal (in low state).
DC/RS
Transmission selection PIN: register / date(register - low state / date - high state).
SDI/MOSI
SPI interface data recording.
SCK
SPI clock signal.
LED
Backlight control (if you don't need to control the backlight, just connect 3.3 V).
SDO/MISO
Reading SPI interface data.
Useful links
- Certificate of conformity
- Compliance with ROHS