LCD IPS Display 1,44'' 128x128px - SPI - 65K RGB - for Raspberry Pi Pico - Waveshare 19576

TFTdisplaydesigned to work withRaspberry Pi Picoboard, its diagonal is1.44"and resolution is128 x 128 px. The module is based on ST7735S chip and communicates viaSPIinterface. It is capable of displaying 65 thousand colors included in the RGB gamut. The size of a single pixel is 0.20 x 0.20 mm. The module is equipped with 4 buttons for any purpose.

The manufacturer has placed a socket on the module where you can directly plug in the Raspberry Pi Pico board or make a connection using wires. Among the pins there are:

• VSYS - supply voltage from 1.8 V to 5.5 V
• GND - ground
• GP8|LCD_DC - LCD data / command line, high for data, low for commands
• GP9|LCD_CS - chip selection line, activated by low state
• GP10|LCD_CLK - SPI clock line
• GP11|LCD_DIN - SPI data line
• GP12|LCD_RST - LCD reset, activated by a low state
• GP13|LCD_BL - LCD backlight
• GP15|KEY0 - user key 0
• GP17|KEY1 - user key 1
• GP2|KEY2 - user key 2
• GP3|KEY3 - user button 3

• Operating voltage: from 3.15 V to 5 V
• Interface: SPI 4-wire
• Display type: TFT
• Chip: ST7735S
• Diagonal: 1,44"
• Resolution: 128 x 128 px
• Number of displayed colors: 65k RGB
• Display size: 25.50 x 26.50 mm
• Pixel size: 0.20 x 0.20 mm
• Module size: 52 x 30 mm

• Display 1.44"

• Manufacturer's website: Waveshare 19576
• User guide
• Diagram
• Documentation ST7735S
• Sample programs