Laser engraving machine / plotter Neje 3 Max V2 - A40640 12W - 470x790mm

The Neje 3 Max V2 laser engraver is equipped with a high-quality N40640 laser module with a maximum power of 12 W, generating a beam with a length of 450 nm. Works with materials such as wood, leather, plastic, rubber. The working area of the device is 470 x 790 mm. The Neje 3 Max V2 laser plotter communicates with the computer using the USB port. Additionally, the device is equipped with a wireless control communication module.

• The laser beam length is 450 nm.
• The beam can be more focused than in CO2 lasers.
• The size of the working area can be freely extended.
• It has smaller dimensions compared to CO2 lasers, thanks to which it takes up less space and is easier to store.
• Cheap and easy to use.
• Large working area with dimensions of 470 x 790 mm.
• Equipped with a Neje A40640 laser with a maximum power of 12 W.
• Equipped with a Bluetooth wireless communication module for remote device management.
• Works with Windows, Android, iOS and macOS.
• It supports popular software such as LaserGRBL and Lightburn.
• The frame of the plotter made of aluminum and PC ensures work stability, which translates into the precision of engravings, markings or cuts.
• It supports a wide range of products, incl. paper, plywood, wood, leather, plastic, PCB and some metals ( full list of supported materials ).

The Neje 3 Max V2 laser plotter has a frame made of aluminum and PC. Adjustable holding force design and natural stress elastic PC structure make the movement more smooth and reliable. The design is equipped with oil-free, easy-to-maintain, replaceable bearings for a better service life of the machine. Neje 3 Max V2 is based on a 32-bit processor clocked at 200 MHz. The device also has a built-in MEMS and Bluetooth, thanks to which it is possible to update via OTA.

Neje 3 Max V2 is equipped with an advanced A40640 laser with a maximum power of 12 W, which in continuous operation can reach the power of 11 W. The length of the laser beam is 450 nm, a single focus point of the beam is 0.04 x 0.06 mm. The laser ensures high engraving accuracy and a clean edge, without the effect of burning.

A laser plotter is a device used to create patterns, images and shapes by non-contact thermal processing with the use of a laser head. With its help, you can apply any pattern on virtually any material. The supported materials depend on the laser used, its power and the beam produced. Most plotters support materials such as wood and paper, the more advanced ones can even engrave in various types of metals and alloys. Laser plotters allow not only marking and engraving, but also cutting, which also depends on the power offered by a given laser head.

• Working area: 470 x 790 mm, expandable to 790 x 1030 mm
• Spot Size: 2032 dpi
• Resolution: 6133 x 10800 px
• Accuracy: 0.01 mm
• Max Movement Speed: 400 mm/s
• Frame material: aluminum alloy and PC
• Structure technology: adjustable Y axis structure, X axis stress adjustment
• Vertical carving: yes (90°C)
• Chip: 32-bit 200 MHz
• BLE control: yes
• MEMS protection: yes
• M7 control: yes (for building an automatic vapor expulsion system)
• M8 control: yes (for building an automatic airflow management system)
• Door control: yes (emergency shutdown)
• Limit switch: yes
• On / off switch: yes, manual
• Power supply: 12 V / 6 A - DC 5.5 / 2.1 mm
• Supported systems: Windows 7/8/10, Android, iOS, macOS
• Supported file formats: GC, SVG, DXF, JPG, JPEG, PNG, BMP, TIF, CR2, etc.
• OTA Upgrade: Yes
• Software: Neje Win Soft, Neje App, Lightburn, LaserGRBL
• Working offline: yes
• Construction dimensions: 970 x 582 x 60 mm

Laser engraving machine / plotter Neje 3 Max V2 - A40640 12 W - 470 x 790 mm.

• Sharpness: 0.04 x 0.06 mm
• Sharpening method: adjustable (recommended from 30 to 55 mm)
• Optical power: pulsed 12 W +, in continuous mode 11 W
• Replaceable lens design: yes
• Stainless steel direct grayscale engraving: yes
• 3D hardwood engraving: yes
• Maximum cutting thickness: 20 mm
• Wavelength: 450 nm
• Power supply: 12 V / 4 A DC
• Interface: 4-pin PH2.0
• Power regulation: PWM
• Fan: long-life, ball bearing
• Surge protection: yes
• Smart feedback: yes
• Temperature feedback: yes
• Dimensions: 40 x 50 x 85 mm
• Weight: 204 g

• Laser engraving machine / plotter Neje 3 Max V2 - A40640 12 W - 470 x 790 mm
• Laser module
• 12 V / 6 A power supply
• USB cable
• Instruction
• Protective goggles
• Emergency button
• Caterpillar x 2
• 12V valve control kit (under 1.5MPa)
• 12 V relay control extension kit (additional AD or DC power supply, max 2500 W)
• Door control kit
• A set of screws and nuts with tools

• Manufacturer's website
• User Guide
• Supported materials