L76X Multi-GNSS HAT - GPS/BDS/QZSS for Raspberry Pi 4B/3B+/3B/2B/Zero - Waveshare 16193

Description: Waveshare L76X Multi-GNSS HAT - GPS/BDS/QZSS - overlay for Raspberry Pi 4B/3B+/3B/2B/Zero.

The GNSS overlay for RaspberryPi and JetsonNano mini-computers supports Multi-GNSS systems:GPS, BDS and QZSS. The main advantages of the module arefast positioning,highaccuracy andlowpower consumption of13 mA,and its supply voltage is3.3 V to 5 V.It communicates through the serial interface UART (RX, TX) via AT commands.

Waveshare L76X Multi-GNSS HAT - GPS/BDS/QZSS

EASY™ and AlwaysLocate™ technology

With EASY™ technology, positioning becomes much faster with route prediction, while AlwaysLocate™ saves energy by putting the device into periodic measurement mode. Module supporting DGPS, SBAS (WAAS / EGNOS / MSAS / GAGAN). The device communicates through the UART interface at 4800 to 115200 bps (default 9600 bps).

Waveshare L76X Multi-GNSS HAT - GPS/BDS/QZSS

Features and applications of the Waveshare L76X Multi-GNSS overlay

• UART communication interface
• EASY™, a route prediction technology, helps with fast positioning
• Baud rate: 4800 to 115200bps (default 9600bps)
• Supports DGPS, SBAS (WAAS / EGNOS / MSAS / GAGAN)
• 4x LEDs to indicate the operating status of the module
• The device is used in vehicle tracking, safety systems, industrial PDAs and GIS applications.

Included:

• Overlay L76X GPS x 1
• External GPS(B) x 1 antenna
• USB cable type A x 1
• Screw set for RPi (2 pieces) x 1
• Pingeader 2 x 20 PIN x 1

Technical Specification of Waveshare L76X Multi-GNSS module Parameter Scope Communication interface UART Transmission speed 4800 to 115200 bps (default 9600 bps) Update frequency 1 Hz (default), 10 Hz (maximum) Protocols NMEA 0183, PMTK Supply voltage 3.3 V to 5 V Working current 13 mA The work pace from -40℃ to 85℃ Dimensions 65 mm x 30 mm Useful links

• Manufacturer's website
• Waveshare Wiki
• User guide
• Diagram
• Example code