Grove - OLED 1,12'' (SH1107) v3.0 128x128px SPI/I2C display - Seeedstudio 104020250

Monochrome display with 1.12'' diagonal and 128 x 128 px resolution, based on SH1107 driver. Operates with 3.3 V and 5 V. The screen uses SPI/I2C bus for communication. There is also included cable for connection with Seeedstudio Base Shield v2.0 overlay.

Grove - OLED 1,12'' v3 display - Seeedstudio 104020250.

The display is equipped with Grove connector.

Display is equipped with 4-pin Grove standard connector, placed on the bottom of the display. This solution allows a more convenient connection with the microcontroller. Grove OLED 1.12'' v3.0 display has the following I2C bus pins:

• GND: Ground of the chip.
• VCC: Supply voltage from 3.3 V to 5 V.
• SCL: I2C bus clock line.
• SDA: I2C data line.

Compared to traditional LCD displays, OLED (Organic Light Emitting Diode) displays have the following advantages:

• High contrast ratio
• Self-emission
• Wide viewing angle
• Slim / thin outline
• Low power consumption

1.12'' OLED Display (SH1107) v3.0.

Components included.

• Supply voltage: 3.3 V / 5 V
• Operation voltage: from 0 V to 2.3 V
• Display type: monochromatic
• Resolution: 128 x 128 px
• Diagonal size: 1,12''
• Supported interfaces: SPI/I2C
• Variable I2C address
• Operating temperature range: -40°C to 85°C

• Grove 1.12'' OLED display (SH1107) v3.0
• Grove cable

• Manufacturer's website - Seeedstudio 104020250
• Data sheet SH1107
• Schematic diagram
• User guide