Характеристики
- UC - I2C
- yes
- UC - USB
- 1x USB
- UC - ядро
- 4. Quad Core
- UC - UART
- yes
- UC - Linux
- yes
- UC - Разъем
- USB typ C
- UC - Android
- Нет
- UC - Ethernet
- yes
- Интерфейс UC - SPI
- yes
- Интерфейс UC - LCD
- Нет
- UC - Внешняя память
- microSD card
- Интерфейс UC - камеры
- Нет
- UC - Цифровые контакты
- 26
Общие характеристики
- UC - ядро
- Cortex A53
- UC - HDMI
- Нет
- UC - частота
- 1.3 GHz
- UC - Микроконтроллер
- RK3328
- UC - оперативная память
- 1 GB
Прочие свойства
- Бренд
- FriendlyARM
Описание
Product description: NanoPi NEO3-LTS - RK3328 Quad-Core 1,3 GHz + 1 GB RAM
NanoPi Neo3minicomputer is based on theRockChip RK3328ARM Cortex-A53processor clocked at 1.29 GHz. It features1 GBofDDR4RAM, a Gigabit Ethernet port with a unique MAC address, a USB 3.0 slot, a USB Type-C power slot, amicroSD cardslot and 26 GPIOs. The module runs the FriendlyWrt / Ubuntu operating system.
NanoPi Neo3.
NanoPi Neo3 - pinouts.
What you need to run NanoPi Neo3?
- MicroSD memory card- the carrier of the operating system.
- AC adapter with microUSB plug- 5V with 1A current capacity with USB type C connector.
NanoPi minicomputer works with systems prepared by the manufacturer: FriendlyWrt and Ubuntu. The operating system can be installed on a microSD memory card.
The operating systems can be downloaded from the manufacturer'swebsite. The manufacturer also providesa guide for installing the system.
Communication of NanoPi Neo3 minicomputer
The module is equipped with communication interfaces that can be found on standard PCs.
- 1x USB 3.0 type A + 2 USB 2.0 ports on 2.54 mm pins,where you can connect WiFi adapter, mouse or keyboard. The number of connectors can be increased by using the USB hub.
- 1x Ethernet 1 Gb/s socketfor wired LAN connection.
- GPIO x 26 pins- general purpose inputs / outputs, which can be used to operate LEDs, buttons, motor drivers. These include such interfaces as I2C, I2S, SPI and UART.
- MicroSD cardslot - a slot for a microSD card which is a carrier for the operating system.
Comparison of NanoPi Neo2 and NanoPi Neo3
Model
NanoPi Neo2
NanoPi Neo3
Processor
Allwinner H5
RockChip RK3328
Architecture
Cortex A53
Cortex A53
Clocking
400 MHz to 1.2 GHz
400 MHz to 1.296 GHz
Core voltage
1.1 V / 1.3 V, two-step voltage adjustment
0.96 V to 1.3 V, 6-level dynamic scaling and voltage adjustment
Number of cores
4
4
Memory bus
DDR3 16-bit
DDR4 32-bit
RAM Frequency
504 MHz
786 MHz to 1056 MHz, dynamic scaling
Ethernet
10/100/1000 Mb/s, software generated MAC address
10/100/1000 Mb/s, unique MAC address
USB
USB 2.0
USB 3.0
Fan connector
-
yes
Power connector
microUSB
USB type C
Key
-
User Key
Uboot
U-boot-2017.11
U-boot-2014.10
Kernel
4.14
5.4
OS
FriendlyWrt / Ubuntu core 16.4
FriendlyWrt / Ubuntu core 18.04
Dimensions
40 x 40 mm
48 x 48 mm
NanoPi Neo3 Minicomputer.
NanoPi Neo3 specification
- CPU: RockChip RK338 ARM Cortex A53 Quad-Core 1.3 GHz
- RAM: 1 GB DDR4
- MicroSD slot
- Ethernet: 10/100/1000 Mbps with unique MAC
- USB:
- 1x USB 3.0
- 2x USB Host on 2.54 mm pin
- USB Type C for power
- Pin Connector: 26-pin GPIO 2.54mm I2C, I2S, SPI, UART
- LED:
- PWR LED (red)
- STAT LED (green)
- Button: 1x general purpose button
- Operating temperature: from -20°C to 70°C
- Power supply: 5 V / 1 A USB C
- PCB: 6 layers
- Dimensions: 48 x 48 mm
- Weight: 22 g
Useful links
- Manufacturer homepage
- User guide
- diagram
- Dimensions
- Documentation RK3328