NanoPi NEO Core Allwinner H3 Quad-Core 1.2Ghz + 512MB RAM + 8GB eMMC
- Артикул:
- 53966749
Характеристики
- UC - I2C
- yes
- UC - ядро
- 4. Quad Core
- UC - UART
- yes
- UC - Linux
- yes
- UC - Разъем
- 5V microUSB
- UC - Android
- Нет
- UC - Windows
- Нет
- UC - Ethernet
- yes
- Интерфейс UC - SPI
- yes
- Интерфейс UC - LCD
- Нет
- UC - Внешняя память
- eMMC 8 GB
- Интерфейс UC - камеры
- Нет
Общие характеристики
- UC - HDMI
- Нет
- UC - ядро
- Cortex A7
- UC - частота
- 1.2 GHz
- UC - Микроконтроллер
- Allwinner H3
- UC - Цифровые контакты
- 68
- UC - оперативная память
- 512 MB
Прочие свойства
- EAN
- 5904422383404
- Бренд
- FriendlyARM
Описание
MinicomputerNanoPi, version Corewith processor Allwinner quad-core ARM Cortex-A7 with a clock frequency of 1.2 GHz. Board has a512 MB of DDR3 RAMand8 GB of memory eMMC,Ethernet Gigabitport on pins of 2.54 mm andmicroUSB slot+3 x USB Hoston pins of 2.54 mm,68 GPIOsand a slot for microSDcards. It works with theuboot, Ambian, DietPi, Lakka, Kali, OpenWrt, etc.
Operating system
NanoPi works with Debian system. The drive of the device may be the microSD card which can be purchased in our store.
Operating systems can be downloaded from the manufacturer's website.
The manufacturer also provides the guidance for the installation of the system.
CommunicationThe user has at his or her disposal:
- GPIO x 68 pin - outputs/inputs of general purpose that can be used to control the LEDs, buttons, drivers of motors. Among them are the pins that support interfaces: I2C, SPI and UART.
- a slot for microSD - slot for microSD memory cards, on which can be installed the operating system.
As a power source, the system uses the microUSB connector. The manufacturer recommends that the voltage indicated on the plug had a value of 5.0 V and a current of the used adapter shall not be less than 2.0 A. In our offer, you will find power supplies that meet these parameters, for example: power supply Extreme 3.1 A.
Starter setThe manufacturer has prepared a set of sensors and modules in a convenient chest that simplifies getting started with minicomputer.
The contents of the set Matrix Starter Kit - sold separately.
Specification Model NanoPi Core Specification Processor Allwinner H3 The coreQuad-Core ARM Cortex A7
Systemsuboot, Ambian, DietPi, Lakka, Kali, OpenWrt, etc.
Clock frequency 1.2 GHz RAM512MB of DDR3, 32-bit
Memory8 GB of eMMC
microSD card
Slot for GPIO68 pins of GPIO
Power5 V / 2 A - microUSB
Board sizes 40 x 40 mm Interfaces USB-Host3 x USB 2.0 on pins of 2.54 mm
Network interface Gigabit Ethernet on pins of 2.54 mm Video - AudioI/O port (4-pin, contained on pins of 2.54 mm)
Camera-
LCD - CommunicationUART, SPI, I2C, GPIO
The debuggerThe serial port on pins of 2.54 mm
Otherstatus LEDs
Included2x goldpin 24-pin strip / 2.54 mm
1x goldpin 20-pin strip / 2.54 mm
Useful links
- The website of the manufacturer of FriendlyArm
- User manual
- Operating systems to download
- Installation of the system
- The scheme of board
- Documentation for the Allwinner H3