FormFutura Economy LCD Resin - 1L - Warm Grey

FormFutura resin in warm gray color, used as a material for forming prints in resin printers equipped with a DLP or LCD projector. The curing UV wavelength ranges from 300 nm to 410 nm . Printouts obtained with FormFutura Economy LCD are characterized by accuracy and a matte finish. The package contains 1 L of the product. When grinding the resin, you must absolutely remember to protect the respiratory tract.

Resin for 3d printers - warm gray.

Sample printout made of FormFutura Economy LCD resin.

• Shake the bottle for at least 2 minutes before each use
• Leave the resin for 10 minutes to let the air bubbles out
• After printing, the resin can be poured back into the bottle

• The finished model should be rinsed in isopropyl alcohol (IPA) or bioethanol for approx. 5 minutes
• The manufacturer recommends using an ultrasonic cleaner
• Before further curing, check that the model is completely dry after rinsing
• Rinsed elements should be placed in a well-ventilated room for at least 30 minutes (compressed air can also be used for at least 2 minutes)
• Items should be cured in a special chamber for 20 to 30 minutes at a temperature of 65 ° C
• The recommended curing wavelength is between 300 nm and 410 nm
• When grinding the resin, you must absolutely remember to protect the respiratory tract

• Curing UV Wavelength: 300 nm to 410 nm
• Impact test: 17 kJ / m2
• Deformation temperature: 63.5 ° C
• Density: 1.21 g / cm3
• Tensile strength: 50 MPa
• Elongation at Break: 5%
• Capacity: 1 L.
• Color: warm gray

Model made with FormFutura Economy LCD, on which every detail was made precisely.

• Manufacturer's website