Filament Rosa3D Flex 96A 1,75mm 0,5kg - Red

Бестселлер

Артикул:: 57515093

Filament Rosa3D Flex 96A 1,75mm 0,5kg - Red

Нет в наличии

Бренд Rosa3D

Сроки доставки указаны ориентировочно и зависят от региона доставки. Подробнее на этой странице

Характеристики

Диаметр нити накала: 1.75 mm

Вес и размеры

Вес: 0.5 кг

Дизайн

Цвет: Красный

Материал

Материал нити накала: ТПУ

Прочие свойства

Бренд: Rosa3D

Описание

Product description: Filament Rosa3D Flex 96A 1.75 mm 0.5 kg - Red

Filament Flex 96A is a thermoplastic polyurethane (TPU) in red , used in 3D printers working in FFF / FDM technology. The material was pre-wound on a spool and vacuum-packed. The filament diameter is 1.75 mm . The material is intended for technical applications, thanks to its excellent interlayer adhesion, it is suitable for applications where mechanical resistance and tensile strength are required. The filament is resistant to grease, oils and many solvents. Flex 96A is very flexible and therefore very demanding due to its high mechanical deformation capacity. This material is recommended for advanced users.

In our offer of filaments you will also find other materials and colors.

Filament Rosa3D Flex 96A 1.75 mm 0.5 kg - Red.

Main features of Flex 96A material

Chemical resistance
Flexibility
Odorless
Tensile strength

Practical application of the Flex 85A filament

Smartphone cases
Parts for drones and RC cars
Seals and covers
Device housings

The filament does not require a closed chamber
In case of problems with adhesion, we recommend the use of an adhesive
Filament can be printed on direct-feed and Bowden printers

Suggested filament printing parameters Printing temperature From 210 ° C to 250 ° C Table temperature 50 ° C to 70 ° C Recommended print cooling 50% to 100% Recommended print speed 15 to 50 mm / s Compatible work tables Glass, smooth PEI, textured PEI, aluminum Due to the differences in the design of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally.

Sample printout from Flex 96A filament.

Technical specification and physical properties of the filament Parameter Range Filament diameter 1.75 mm Filament dimensional tolerance +/- 0.05 mm Colour Red Printing temperature From 210 ° C to 250 ° C Recommended print speed From 50 to 70 mm / s Spool - material Flex 96A (TPU) Spool diameter 200 mm Spool width 55 mm Mounting hole diameter 52 mm Desiccant Yes Vacuum packing Yes Material density 1.22 g / cm 3 Tensile strength at break 55 MPa Tensile elongation 350% Print speed 15 to 50 mm / s Net weight 0.5 kg

If there are problems with the extrusion of the filament, you should:

Loosen the screw that adjusts the level of pressure of the knurl against the roller
Reduce the printing speed
Install a Teflon tube sealing the filament feeding path

Useful links