Filament Devil Design PLA 1,75mm 0,33kg - Glow in the Dark Blue

Бестселлер

Артикул:: 47399366

Filament Devil Design PLA 1,75mm 0,33kg - Glow in the Dark Blue

Нет в наличии

Бренд Devil Design

Сроки доставки указаны ориентировочно и зависят от региона доставки. Подробнее на этой странице

Характеристики

Диаметр нити накала: 1.75 mm

Вес и размеры

Вес: 0,33 kg

Дизайн

Цвет: Синий

Материал

Материал нити накала: ПЛА

Прочие свойства

Бренд: Devil Design

Описание

Product description: Devil Design PLA Filament 1,75 mm 0,33 kg - Glow In The Dark Blue

PLA Glow In The Dark Blue filament is a material that has a natural color in sunlight and glows blue in the dark. It has a diameter of 1.75mm and is wound on a spool containing 0.33kg of product. An inexpensive, easy to use cartridge for printing pens and 3D printers. It will work well for printing durable, decorative and solid prints. Material mainly for beginners, but also for those more advanced 3D printers.

In our offer of filaments you will also find other materials and colors.

Filament Devil Design PLA 1,75 mm 0,33 kg - Glow In The Dark Blue.

PLA material

Spool contains 0,33 kg of filament net. The material can be used in all FFF printers unprotected from the use of filaments from a third party supplier and open source designs. PLA is a biodegradable material, made from renewable natural resources. It is primarily dedicated to amateurs due to its trouble-free use.

Properties of PLA filament

Easy to print at low temperatures
Resistance to material warping
Biodegradability
Low odour intensity
Inexpensive and comes in many colour variations
It is not flammable
High strength
Totally waterproof
Glows blue in the dark

Filaments by Devil Design.

Suggested parameters for printing with the filament Head temperature From 200°C to 235°C Table temperature From 50°C to 60°C Print cooling Recommended

Due to differences in construction of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally.

Technical specification and physical properties of Devil Design PLA filament Parameter Range Filament diameter 1,75 mm Dimensional tolerance of the felt +/- 0.05 mm Roundness of the filament +/- 0,02 mm Material surface Gloss Material shrinkage Very low Spool material Transparent polycarbonate Spool diameter 160 mm Spool width 41 mm Mounting hole diameter 52 mm Packaging Printed carton Vacuum packaging Yes Moisture absorber Yes Product weight 0,33 kg net weight

Devil Design PLA Filament 1,75 mm 0,33 kg - Glow In The Dark Blue

PLA material is made using natural raw materials such as sugar cane and corn, actually cornmeal. Because of this, it only gives off a small amount of a specific smell during thermal processing. It is worth remembering that printing should take place in a well-ventilated room.

Filament from Devil Design PLA company with diameter of 1,75 mm and weight of 0,33 kg in glow In the dark blue colour can be successfully used for prototyping. Due to low shrinkage and increased resistance to mechanical damage, all prints maintain their original appearance for a long time.

Devil Design PLA Filament 1,75 mm 0,33 kg - Glow In The Dark Blue

These PLA filaments start to thaw at a temperature of 50℃, while the melting point is between 150℃ and 170℃.

Devil Design's PLA material has a density of 1.24 g/cm³ and virtually zero water absorption.

Useful links