Filament Rosa3D ASA 1,75mm 0,7kg - Silver

Product description: Filament Rosa3D ASA 1.75 mm 0.7 kg - Silver

ASA filament in silver , produced by Rosa3D . During printing, it shows a limited degree of shrinkage, the resulting vapors are less noticeable than when using traditional ABS. The main feature of ASA thermoplastic is its high resistance to UV radiation, heat and moisture. It can be used in outdoor conditions exposed to changing weather conditions. The filament diameter is 1.75 mm . The weight of the material on the spools is 0.7 kg. The spool on which the filament is wound is in two different versions sent randomly.

In our offer of filaments you will also find other materials and colors.

Filaments used in 3D printing .

Additional information about ASA

• ASA filament (acrylonitrile - styrene - acrylic) is a material with high resistance to UV radiation, moisture and heat. It can be used in an environment with changing weather conditions.
• ASA has lower shrinkage than popular ABS. It also gives off less annoying fumes during printing.
• The thermoplastic shows no signs of deformation up to a temperature of about 94 ° C.
• ASA material is often used in the automotive and marine industries. Elements made of this thermoplastic are, for example, mirror and sensor housings, covers, radiator covers.
• First layer adhesion can be improved by using a small amount of ASA dissolved in acetone.
• For this material, printing in a closed chamber is recommended.

Suggested filament printing parameters Head temperature 220 ° C to 250 ° C Table temperature From 90 ° C to 110 ° C

Due to the differences in the design of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally.

Filament Rosa3D ASA 1.75 mm 0.7 kg - Silver.

Technical specification and physical properties of the filament Parameter Range Filament diameter 1.75 mm Filament dimensional tolerance +/- 0.05 mm Color Silver Printing temperature 220 ° C to 250 ° C Smell palpable, not intense Spool - material ASA Spool diameter 200 mm Spool width 55 mm Mounting hole diameter 52 mm Desiccant Yes Vacuum packing Yes Material density 1.07 g / cm 3 Tensile strength at break 40 MPa Elongation at break 35% Modulus of elasticity 1725 MPa Net weight 0.7 kg

Useful links

• Manufacturer's website
• Product card
• What is 3D printing
• Filaments in 3D printing