3D printer - Anycubic Photon Mono X 6Ks

Anycubic resin printer equipped with a monochrome LCD display with a diagonal of 9.1 " , which allows you to obtain precise models with a very high resolution of 5760 x 3600 px ( 6K ). There is a protective film on the screen to protect against scratches and resin leakage. The set also includes an additional, replaceable film. A large working area with dimensions of 196 x 122 x 200 mm and a maximum volume of 4.76 L allows you to create unique, impressive prints.

3D printer - Anycubic Photon Mono X 6Ks - resin.

The device can create very detailed prints.

The 9.1" monochrome LCD screen with a resolution of 5760 x 3600 px (6K) guarantees the extraction of the smallest details from the model, and the high contrast ratio of 380: 1 provides it with extremely sharp and clear edges. The display is covered with a foil that protects it from scratches and resin penetration. The foil has a high level of light transmission.

Anycubic Photon Mono X 6Ks allows you to create prints with a maximum size of 196 x 122 x 200 mm . The maximum print volume of the device is 4.76 L. Thanks to this, the printer can be used to form large printouts or several smaller ones at once.

Anycubic Mono X 6K workspace.

The LighTurbo matrix ensures efficient exposure of the cured resin.

Thanks to the proprietary Anycubic LighTurbo matrix system and a precise optical lens, the intensity of UV light is evenly distributed over the model and solidly hardens it . An efficient source ensures a smooth surface, without visible lines of print layers, and also allows you to create a print much faster. Photon Mono X 6Ks can work at speeds up to 60 mm/h.

The frame of the printer, constructed of solid and wear-resistant components , is a guarantee of the highest quality of printouts. Anycubic Photon Mono X 6Ks is equipped with double Z-axis rails that ensure stability, even when printing at high speeds. The construction is reinforced by POM nuts, which prevent loosening of the guides.

Z axis guide reinforced with POM nuts.

Thanks to the engraved work plate, the models will not slide off during printing.

Photon Mono X 6Ks is equipped with a working platform made of aluminum alloy. A checkerboard pattern was engraved on its surface. This provides much greater adhesion and stability of prints than in the case of a sandblasted platform. The engraved build plate reduces the risk of the printout peeling off or slipping off.

• Removable cover that effectively protects against UV radiation
• 3.5 inch touch control panel
• Resin tank with scale
• Updated Anycubic Photon Workshop 3.0 slicer with user-friendly interface
• Manual leveling of the platform in 4 points

Printout created with Photon Mono X 6Ks.

• Manufacturer's website
• User manual