EYESPI Pi Beret - Eyespi display adapter for Raspberry Pi - 18pin FPC connector, STEMMA QT / Qwiic - Adafruit 5783

EYESPI Pi Beret is a combination of an overlay and an adapter that allows you to connect many peripheral devices to Raspberry Pi in a plug-and-play way - without the need to get tangled in cables. Using it, you will be able to quickly connect colorful TFT orE-Ink displays and your favorite sensors . The board also has a convenient STEMMA QT / Qwiic connector to facilitate prototyping and an 18-pin FPC connector with a 0.5 mm pitch . FPC tape must be purchased separately.

EYESPI Pi Beret - Eyespi to Raspberry Pi display adapter - 18pin FPC connector, STEMMA QT / Qwiic - Adafruit 5783.

EYESPI Pi Beret - Eyespi display adapter for Raspberry Pi.

• EYESPI connector - allows you to connect EYESPI-compatible displays,
• Pins needed to use the display:
  • MOSI/MISO/SCK - SPI pins are connected to the default port SLEEPS in Raspberry Pi,
  • Display CS - Raspberry Pi CE 0 ,
  • Display DC - Raspberry Pi GPIO #25 ,
  • Display Reset - Raspberry Pi GPIO #27 ,
  • Display Busy - Raspberry Pi GPIO #17 (used by E-Ink displays),
  • Display Backlight - Raspberry Pi GPIO #18 (used to illuminate the screen),
  • Display Touch CS - Raspberry Pi CE 1 B (optional),
  • Display Touch IRQ - Raspberry Pi GPIO #24 (optional),
• SCL - I2C interface clock line,
• SDA - data line of the I2C interface.

• Purpose: adapter for Raspberry Pi
• Pins: solder pads, STEMMA QT / Qwiic, 18-pin FPC connector with a pitch of 0.5 mm
• Board dimensions: 64.8 x 15 x 9.7 mm
• Weight: 5.4 g

• EYESPI Pi Beret - Eyespi display adapter for Raspberry Pi - 1 piece

• Manufacturer's website: Adafruit 5783
• User Guide