Arduino MKR NB 1500 - module ABX00019
- Артикул:
- 42763106
Характеристики
- UC - I2C
- yes
- UC - USB
- microUSB
- UC - PWM
- 12
- UC - WiFi
- yes
- UC - UART
- yes
- UC - ядро
- 1. Single Core
- UC - Вспышка
- 256 kB
- UC - частота
- 48 MHz
- Напряжение от
- 5.0 V
- Интерфейс UC - SPI
- yes
- Выходное напряжение от
- 3.3 V
- UC - оперативная память
- 32 kB
Общие характеристики
- UC - A/C
- 12-bit
- UC - ядро
- 32-bit ARM Cortex M0
- Напряжение до
- 3.7 V
- UC - аналог в
- 7
- UC - Микроконтроллер
- ATSAMW25
- Выходное напряжение до
- 3.3 V
- UC - Цифровые контакты
- 8
Прочие свойства
- EAN
- 7630049200012
- Бренд
- Arduino
- Номинальное выходное напряжение
- 3.3 V
Описание
The module based on the systemAtmel ATSAMD21 SoCandU-blox SARA-R410M, allowing you to stay connected in the standardNarrowband-IoTandLTE Cat M1. Tile has a coreCortex-M0+,256KBFlash memory,32KB SRAM,8 digitalinputs/outputs 12 PWM channels,7 analog inputs, as well as popular communication interfaces, includingI2S. Works with a voltage of3.3 V. Designed for IoT projects. The module can be powered with battery Li-Pol 1S 3,7 V with minimum 700 mAh, or charged in the event of an external powering of the module. ATSAMW25 consists of three main blocks:
- the core SAMD21 Cortex-M0+ 32bit low power ARM MCU
- system wi-fi U-Blox Nina W10 low power 2.4 GHz IEEE 802.11 b / g / n
- ECC508 CryptoAuthentication
Below are a few features that distinguish modules Arduino compared to other programmable tiles.
Name Description
Installed
bootloader
Thanks to installed bootloader, for programming the device sufficient are micro usb cableandthe software from the manufacturer's website.Small
size
This version is characterized by small size: 61.5 x 25 mm. It does not have soldered connectors. Included are strips goldpin for self-assembly.Standard NB-IoT
and LTE Cat
Arduino MKR NB 1500 features the U-blox SARA-R410M, allowing you to stay connected in the standard Narrowband-IoT and LTE Cat M1.Digital leads
8 digital inputs/outputs allows, i.a. the control of LEDs, relays and the reading of the buttons' states.Current efficiency
The maximum power efficiency for one lead is 7 mA.PWM outputs
12 PWM outputs allow, for example, the control of motors and the brightness control of the LEDs.Analog inputs
7 inputs of built-inanalog to digital converter with a resolution of 12-bits, support, i.a., sensors with analog output.Serial communication
The device supports popular communication interfaces, i.a. UART, I2C, I2S and SPI.Built-in memory
ChipAtmelATSAMW25 is a signal at a frequency of 48 MHz, has 256 KB of Flash memory and 32 KB of RAM SRAM.Power 5 V
microUSB / battery 3.7 V
To power the Arduino, you can usea power sourcewith a voltage of 5 V with a microUSB connector or the battery Li-Pol 3.7 V 1S with the capacity of at least 700 mAh.Charging the batteries Li-Pol
The module has the function of powering the batteries with the voltage up to 4.2 V with an intensity of 350 mAh.
Built-in led
The connected led on pin 6, allows debugging simple programs.
First run
To help you get started with the module, we have prepareda tutorial that applies to the installation and first run of the Arduino environment.
The subject of the sale is the original product for Arduino, Botland isthe official distributor of this company.
Specification- Voltage from 3.7 V to 5 V
- Current consumption: 7 mA
- ChipAtmel ATSAMD21
- Core: Cortex-M0
- Maximum clock frequency: 48 MHz
- SRAM: 32 KB
- Flash memory: 256 KB
- I/O Ports: 8
- PWM outputs: 12
- Number of analog inputs: 7 (channels of A/C converter with 12-bit resolution)
- Serial interfaces: UART, SPI, I2C, I2S
- External interruptions
- MicroUSB slot
- JST 2.0 mm slot for connecting with a lipol battery 3.7 V
- Tile sizes: 61,5 x 25 mm
- Weight: 32 g
- The manufacturer's website
- Arduino Forum
- Software Arduino IDE
- Documentation ATSAMW25
