VL6180X time-of-flight - distane and ambient light sensor I2C - Pololu 2489
- Артикул:
- 47398141
Характеристики
- Напряжение до
- 2.7 V
- Напряжение от
- 5.5 V
- Датчик - расстояние от
- 0 cm
Общие характеристики
- Датчик - расстояние до
- 10 см
Прочие свойства
- Бренд
- Pololu
- Подключение
- I2C
Описание
A digital sensor that combines proximity measurement and the ability to measure ambient light. It operates up to 10 cm with a resolution of 1 mm. It is powered from 2.7 to 5.5 V, has a built-in voltage regulator and communicates via the I2C bus.
The time-of-flight method is based on measuring the time from the emission of an infrared laser pulse to its return to the detector. It is independent of light reflection from the object.
The module has passive elements necessary for the proper functioning of the system. The outputs are popular goldpin connectors, which enable the sensor to be connected bywires ordirectly connected to thecontactplate. The connectors are included in the set for self-soldering.
Product compatible with Arduino
The library to connect with Arduino can be found atthis address.
CommunicationThe sensor has seven leads for mountinggoldpinconnectors - 2.54 mm raster (included).
NameDescription
VDD Adjustable output voltage 2.8 V. VINSupply voltage of the module from 2.7 V to 5.5 V.
The SDA and SCL lines are pulled up to this level with resistors.
GND The weight of the system. SDA / SDI / SDOI2C data line.
Low state is 0 V and high state is equal to VIN pin.
SCL / SPCClock line I2C.
Low state is 0 V and high state is equal to VIN pin. GPIO0 / CEPin acting as Chip Enable. Default is high.
Details indocumentation.
GPIO1 Programmable interrupt output. Seedocumentationfor details. Sensor specification VL6180X- Supply voltage: 2.7 V to 5.5 V
- Power consumption: 5 mA
- Measuring range: 0 to 10 cm
- Resolution: 1 mm
- Interface: I2C (TWI)
- Plate dimensions: 13 x 18 x 2 mm
- Weight: 5 g
- Also includes a goldpin strip
- The manufacturer's website: Polol 2489
- Technical Documentation VL6180X
- Module diagram
- Basic module operation
- User guide
- Library for Arduino
- Product page ST