VICTRON ENERGY Blue Solar Mppt 75/10 12/24V-10A Regulator
Бестселлер
- Артикул:
- 108375371
33 446 AMD
Характеристики
Дизайн
- Цвет
- Черный, Синий
Прочие свойства
- Бренд
- Victron Energy
Описание
VICTRON BlueSolar MPPT 75/10 (12/24V-10A) charge controller.
It has an ultra-fast MPPT controller that improves energy harvesting.
This regulator monitors the state of charge of the battery and increases day by day the level of load disconnection if necessary.
Features:
Ultra-fast Maximum Power Point Tracking (MPPT).
Especially under cloudy skies, when light intensity changes continuously, an ultrafast MPPT controller will improve energy harvesting by up to 30% compared to PWM charge controllers, and up to 10% compared to slower MPPT controllers.
Charging output.
The battery can be prevented from over-discharging by connecting all loads to the charging output.
This output will disconnect the load when the battery has been discharged, when it reaches a preset voltage.
You can also choose to set an intelligent battery management algorithm:
see BatteryLife.
The load output is short-circuit proof.
Some loads (especially inverters) can be connected directly to the battery, and the inverter remote control to the load output.
A special interface cable may be required.
please refer to the manual.
BatteryLife:
intelligent battery management.
When a solar charge controller is not able to recharge the battery to full capacity in a day, what happens is that the battery cycles continuously between ´´partially charged´´ and ´´end of discharge´´ states.
This mode of operation (without periodic full recharge) will destroy a lead-acid battery in weeks or months.
The BatteryLife algorithm will monitor the state of charge of the battery and, if necessary, increase the load disconnect level (i.e, disconnect the load earlier) day by day until the collected solar energy is sufficient to recharge the battery to nearly 100%.
From that point on, the load disconnection level will be modulated so that a near 100% recharge is achieved about once a week.
Programmable battery charging algorithm.
See the Support & Downloads > Software section on the victron website.
Day/night timer and dimmer option.
See the Support & Downloads > Software section on the victron website.
Real-time data display options.
Smartphones, tablets and other Apple and Android devices:
Requires a VE connection cable.
Direct to Bluetooth Smart Dongle.
ColorControl or Venus GX panel via VE.Direct cable.
It has an ultra-fast MPPT controller that improves energy harvesting.
This regulator monitors the state of charge of the battery and increases day by day the level of load disconnection if necessary.
Features:
Ultra-fast Maximum Power Point Tracking (MPPT).
Especially under cloudy skies, when light intensity changes continuously, an ultrafast MPPT controller will improve energy harvesting by up to 30% compared to PWM charge controllers, and up to 10% compared to slower MPPT controllers.
Charging output.
The battery can be prevented from over-discharging by connecting all loads to the charging output.
This output will disconnect the load when the battery has been discharged, when it reaches a preset voltage.
You can also choose to set an intelligent battery management algorithm:
see BatteryLife.
The load output is short-circuit proof.
Some loads (especially inverters) can be connected directly to the battery, and the inverter remote control to the load output.
A special interface cable may be required.
please refer to the manual.
BatteryLife:
intelligent battery management.
When a solar charge controller is not able to recharge the battery to full capacity in a day, what happens is that the battery cycles continuously between ´´partially charged´´ and ´´end of discharge´´ states.
This mode of operation (without periodic full recharge) will destroy a lead-acid battery in weeks or months.
The BatteryLife algorithm will monitor the state of charge of the battery and, if necessary, increase the load disconnect level (i.e, disconnect the load earlier) day by day until the collected solar energy is sufficient to recharge the battery to nearly 100%.
From that point on, the load disconnection level will be modulated so that a near 100% recharge is achieved about once a week.
Programmable battery charging algorithm.
See the Support & Downloads > Software section on the victron website.
Day/night timer and dimmer option.
See the Support & Downloads > Software section on the victron website.
Real-time data display options.
Smartphones, tablets and other Apple and Android devices:
Requires a VE connection cable.
Direct to Bluetooth Smart Dongle.
ColorControl or Venus GX panel via VE.Direct cable.
