Tufty 2040 - board with RP2040 and 2.4'' TFT LCD + accessories - PiMoroni PIM636

A set consisting of a Tufta 2040 plate and useful accessories such as a battery basket and a charging cable. The set also includes a lanyard made of recycled plastic bottles and a square-shaped Velcro fastener.

The Tufta 2040 board produced by PiMoroni was based on the microcontroller of the Raspberry Pi foundation - RP2040 Dual-Core ARM Cortex M0 +. The board is equipped with a TFT color LCD display with a diagonal of 2.4 " and a resolution of 320 x 240 px . On the front of the board there are 5 functional buttons for changing the displayed content or adjusting the brightness of the image. , JST battery connector, STEMMA QT / Qwiic connector, USB type C connector and two buttons - BOOT and PWR.

Tufts 2040 - board with RP2040 and 2.4 '' TFT LCD display + accessories - PiMoroni PIM636.

The Raspberry Pi RP2040 microcontroller is based on a dual-core ARM Cortex M0 + processor. There is 264 KB of SRAM on board, 30 GPIO pins, including a 12-bit four-channel ADC. One of the more important functions of RP2040 is programmable IO, which can execute custom programs to manipulate GPIO pins. They also allow data transfer between peripheral devices - they can offload tasks that require high data transfer speeds.

The Tufty 2040 board is programmed in C / C ++ or MicroPython. The manufacturer has prepared C ++ and MicroPython libraries along with sample program codes. In addition, it also provides a user guide , which makes it much easier to start working with the board, especially if you are a novice programmer.

• C ++ examples
• MicroPython examples

• Tufts 2040 - board with RP2040 and 2.4 '' TFT LCD display - PiMoroni PIM636
• Basket for 3 AAA batteries
• AAA battery - 3 pieces
• Velcro fastening
• Black lanyard (made from recycled plastic bottles)
• USB C - USB A cable

Tufty 2040 has 5 buttons on the front.

• Display: TFT color LCD
  • diagonal: 2.4 "
  • resolution: 320 x 240 px
  • driver: ST7789v
• Microcontroller system: RP2040 dual-core ARM Cortex M0 + clocked at 133 MHz
• SRAM memory: 264 kB
• Flash memory: 2 MB QSPI with XiP support
• Five buttons located on the front - including power and start buttons (the start button can also be used as a user button)
• Reset and boot buttons
• White LED
• USB Type-C connector for power and programming
• JST-PH connector for connecting the battery (from 3 V to 5.5 V)
• STEMMA QT / Qwiic connector for I2C modules and sensors

• Manufacturer's website: PiMoroni PIM636
• User Guide
• C ++ / MicroPython Libraries
• Layout diagram
• Tile dimensions