Touch screen - resistive LCD 5'' 800x480px - HDMI + GPIO for Raspberry Pi + case - Waveshare 11189

Description

5" resistive touch screen for the Raspberry Pi with a resolution of 800 x 480 px. It works with any version of theRaspberry Pi via the HDMI connector and the pins GPIO - necessary hardware included in the package. The device also works with minicomputers:Banana PiandBeagle Bone Black. A special black-and-white case for the Raspberry and the screen included.

 

The device communicates via an HDMI adapter (image) pins and GPIO (touch).

Connect to Raspberry Pi

In order to start the screen, put the device on the GPIO pins of the Raspberry Pi and connect the HDMI connector.

In the kit you will also find a special case, which will allow you to install the Raspberry with the screen and set the screen at an angle of 45° or 60°. 

Software

The manufacturer has prepared the operating system with the installed drivers. The system should be unpacked using a dedicated program such as WinZip and upload to the memory card usingWin32 Disk Imager.

 

Screenshot from the Win32 Disk Imager program. When you select the system, just press the Write button and wait until the installation process is completed.

 

A detailed description of the connection and installation of drivers without changing the Raspberry Pi, Banana Pi and Beagle Bone Black systemscan be found inour guideor onthe manufacturer's website.

GPIO Pin GPIO Symbol Description 1, 17 3.3 V Power Supply 3.3 V. 2, 4 5V Power Supply 5 V. 3, 5, 7, 8, 10, 11, 12, 13, 15, 16, 18, 24 NC Not connected. 6, 9, 14, 20, 25 GND Ground. 19 TP_SPI SPI input data for the touch panel. 21 TP_SO SPI output data for the touch panel. 22 TP_IRQ Cutting off the touch panel, recognizing touch sets the low state. 23 TP_SCK SPI clock signal for the touch panel. 26 TP_CS Chip select for touch panel. Specification

• Screen type: resistive touch
• Diagonal: 5 "
• Resolution: 800 x 480 px
• Works with:Raspberry Piin version 4B, 3B, 2B and B+ (works directly withsystem from manufacturer)
• Screen uses 26 GPIO pins
• 4 mounting holes (screws included in the package)
• Screen dimensions: 121 x 76 mm
• External frame dimensions: 133 x 95 mm
• Case in black and white
• The possibility of setting at an angle of 45 ° or 60 °
• Material: acrylic

Case assembly

The case allows you to install the screen along with minicomputerem Raspberry Pi in the back.

An example of a mounting the screen in the case.

Set includes

• 5" screen and resistive touch
• Connector HDMI
• Mounting screws
• Stylus touch pen
• Case for Raspberry and screen - black-and-white

 

Useful links

• The website of the manufacturer: Waveshare
• User manual
• Wiki guide manufacturer along with a system image
• CE certificate
• RoHS Certificate