Touch screen H - capacitive LCD TFT 5'' 800x480px HDMI + USB for Raspberry Pi - Waveshare 14300

Touch screen capacitive 5" for the Raspberry Pi with a resolution of 800 x 480 px. Works with any 40-pin version of the Rasbperry Pi with HDMI connector and microUSB - cables are included in the package. The board also has a mini-Jackconnector. The device also works with minicomputers:Banana PiandBeagle Bone Black, and all devices with HDMI, such as game consoles, desktop computers, etc.

The device communicates via the HDMI cable (picture) and microUSB (touch). Both wires are included in the package.

In order to run the screen, you must connect the device to a Raspberry Pi via the supplied wire: HDMI and microUSB. HDMI transmits the image, a USB port receives data of the touch interface.

Example of connecting the screen to the Raspberry Pi.

The screen works with the latest operating system Raspbian without the need to install drivers. However, in order for the screen to display the picture properly, you should change the resolution in the configuration file. To do this, open the file config.txt command:

• sudo nano /boot/config.txt

and then at the end add the following statements:

• max_usb_current=1
• hdmi_group=2
• hdmi_mode=87
• hdmi_cvt 800 480 60 6 0 0 0
• hdmi_drive=1

After saving the file and reboot the raspberry image and the touch function should work fine.

A detailed description can be found onthe website of the manufacturer.

• Screen type: touchscreen capacitive
• Diagonal: 5 "
• Resolution: 800 x 480 px
• Works with:
  • Rasbperry Pi in version 4B, 3B+, 3B, 2B and B+ Zero: works with the latest operating system without the need of additional settings
  • Beagle Bone Black
  • Banana Pi/ Banana Pro
  • Windows 7 / 8 / 8.1 / 10 without the need to install drivers
  • Microsoft XBOX 360, Sony PS4, Nintendo Switch, etc.
• Also works with all HDMI devices (touch function not available)
• 4 mounting holes (screws included in the package)
• Mini-Jack connector
• Screen dimensions: 121 x 76 mm

The outer dimensions of the screen.

• 5" resistive touchscreen
• HDMI cable
• Screws for mounting
• USB cable - microUSB for touch interface

• Dedicated case
• Set of 5" screen witha transparent body
• Set of 5" display with black and white case

• The website of the manufacturer: Waveshare
• Wiki guide manufacturer along with a system image