Flux TK83 for soldering SMD - 50ml

TK83 flux is an alcoholic colophony solution with the addition of organic activators, designed for soldering at a temperature of280°Cmaximum. The product is a liquid, sealed tightly in a small50 mlplastic bottle with a brush for application. It is ideal for manual tinning with the intention to restore solderability. The flux hasan amber colourand a specific alcohol-resin smell.

Flux TK83 flux with SMD soldering brush - 50 ml.

• Mixing assembly
• Wiring end splicing
• Machine soldering in professional and consumer electronics
• Soldering of passive surfaces

Highlyflammableas liquid and steam. May cause an allergic reaction of the skin, so use protective gloves. Keep tightly closed in a dry and ventilated place away from heat sources, hot surfaces, ignition sources, open fire. Do not store with oxidizing substances.

Pictograms indicating type of hazard.

• Flux TK83
• Physical state: liquid
• Colour: amber
• Bottle with brush
• Density at 20°C: approximately 0.86± 0.02 g/cm³
• Alcoholic colophony solution with organic activators
• Maximum soldering temperature: 280°C
• Smell: alcohol-resin
• Flammable liquid and vapour
• Chemical stability: under normal conditions stable product
• Composition: isopropyl alcohol (CAS:67-63-0), rosin (CAS:8050-09-7), benzoicacid (CAS:65-85-0)
• Capacity: 50 ml

Flux TK83 flux is an excellent tool for any electronics and anyone who performs soldering work on electronic devices. It is a preparation which significantly facilitates soldering, by cleaning the surface and at the same time supporting the viscosity of molten tin to the soldered spot.

The basic components of Flux TK83 flux are alcohols and resin colophony with organic activators. A special brush is included in the set with a 50 ml bottle to distribute the liquid on the surface to be soldered.

With Flux your soldering will be much simpler, faster and more efficient. It will be perfect for both SMD and THT components and will retain all its properties up to 280°C.

The flux is used, among others, during whitening of cable ends, for soldering passive surfaces or for machine soldering (both for professional and consumer electronics).

• Manufacturer's website
• Technical card
• Safety data sheet