SYNOLOGY RX418

Storage capacity expansion: - When the storage capacity on Synology 1U RackStation reaches its limit, Synology expansion unit RX418 provides easy capacity expansion by adding 4 3.5´´/2.5´´ SATA drives to the system. Synology RX418 can also be used as a dedicated local backup destination of Synology 1U RackStation for comprehensive data protection. Reliable plug-and-play design: - Simply connect Synology RX418 to corresponding Synology RackStation and it is ready to use. Drives in the connected Synology RX418 operate as though they were internal to the connected Synology NAS and can be managed directly by Synology DiskStation Manager (DSM), with no additional software installation required. Green and easy to manage: - Award-winning Synology DSM provides an intuitive user interface for easy system management. Drive hibernation can be configured in DSM to take effect automatically when the system has been inactive for a period of time. This not only saves energy but also extends the lifespan of the installed drives. - NAS Selector - RAID Calculator - NVR Selector - Knowledge Base - Downloads - Community Specifications: Applied Models: - Supports creating volumes across different units- - 21 series:RS1221RP+, RS1221+ - 20 series:RS820RP+ - 19 series:RS1219+, RS819 - 18 series:RS818RP+, RS818+ - 16 series:RS816 - 15 series:RS815RP+, RS815+, RS815 - Supports creating volumes on a single unit only: RS217 Notes: - For more information on the compatibility of each expansion unit, please refer to this article. - To have better performance, we recommend creating storage volumes physically located within the same NAS or Expansion Unit, rather than creating volumes across your NAS and Expansion Unit. - DSM version requirement: 6.1.4-15217-3 or later version Storage: - Drive Bays: 4 Compatible Drive Type: (See all supported drives): - 3.5´´ SATA HDD -2.5´´ SATA HDD - 2.5´´ SATA SSD Maximum Internal Raw Capacity: - 64 TB (16 TB drive x 4) (Capacity may vary by RAID types) - Hot Swappable Drive: Yes - RAID Management through Synology DSM: Yes Notes: - Storage Pool and volume creation require all drives to be listed as compatible on the device model´s compatibility list. External Ports: - eSATA Port: 1 Appearance: - Size (Height x Width x Depth): 44 mm x 430.5 mm x 290 mm - Size (Height x Width x Depth) (with server ears): 44 mm x 480 mm x 325 mm - Weight: 4.28 kg Rack Installation Support: - 4-post 19´´ rack (Synology Rail Kit - RKM114/RKS1317) - 2-post 19´´ rack (direct mounting) - Notes: The rail kit is sold separately Power: - Power Recovery: Synchronized with the Synology RackStation - Power Supply Unit / Adapter: 100 W - AC Input Power Voltage: 100 V to 240 V AC - Power Frequency: 50/60 Hz, Single Phase - Power Consumption*: 23.26 W (Access) - 6.39 W (HDD Hibernation) - British Thermal Unit: 79.42 BTU/hr (Access) - 21.82 BTU/hr (HDD Hibernation) - Notes: Power consumption is measured when it is fully loaded with Western Digital 1TB WD10EFRX hard drive(s). Temperature: - Operating Temperature: 5°C to 35°C (40°F to 95°F) - Storage Temperature: -20°C to 60°C (-5°F to 140°F) - Relative Humidity: 5% to 95% RH Others: - System Fan: 40 mm x 40 mm x 3 pcs - Noise Level: 25.1 dB(A) Certification: - FCC - CE - BSMI - EAC - VCCI - RCM - KC