Step-Down Voltage Regulator - adjustable 3,3V - 25V 5A - DFRobot DFR0205

Бестселлер

Артикул:: 42767209

Step-Down Voltage Regulator - adjustable 3,3V - 25V 5A - DFRobot DFR0205

Фото #1 товара Step-Down Voltage Regulator - adjustable 3,3V - 25V 5A - DFRobot DFR0205

Фото #2 товара Step-Down Voltage Regulator - adjustable 3,3V - 25V 5A - DFRobot DFR0205

Фото #3 товара Step-Down Voltage Regulator - adjustable 3,3V - 25V 5A - DFRobot DFR0205

Фото #4 товара Step-Down Voltage Regulator - adjustable 3,3V - 25V 5A - DFRobot DFR0205

7 718 AMD

Бренд DFRobot
Доставка из Польши
Курьер DHL 30 мая
Стоимость доставки заказа в Армению от 141 694 AMD

Сроки доставки указаны ориентировочно и зависят от региона доставки. Подробнее на этой странице

Характеристики

Напряжение до: 3.6 V
Стабилизатор - Тип: step-down
Выходное напряжение от: 3.3 V
Выходное напряжение до: 25 V

Вес и размеры

Длина: 46 mm
Высота: 20 мм
Ширина: 50 mm

Общие характеристики

Напряжение от: 25.0 V

Прочие свойства

Бренд: DFRobot

Энергопитание

Сила тока: 5 A

Описание

Product description: 3.3V adjustable step-down converter - 25V 5A - DFRobot DFR0205.

Inverter module for converting input voltagefrom 3.6 V to 25 V, to output voltagefrom 3.3 V to 25 V. The current capacity for 5 V is 5 A.The input voltage must be higher than the output voltage.

Step-down converter - adjustable.

The module has three different output interfaces, such as goldpin, ARK connectors and JST 2-pin raster 2.54 mm. On the python there is a power switch and a potentiometer to set the output voltage, as well as a switch for 5 V or set by the potentiometer.

Module outputs

The board is equipped with three different output interfaces: goldpin, ARK and JST connectors.

Pin Description 1, 2 JST connector 2.54 mm - output voltage interface (Vout: 1, GND: 2) 3, 4 ARK connectors - output voltage interface (Vout: 3, GND: 4).

5, 6

7, 8

Goldpin connectors - output voltage interface (Vout: 5, 7; GND: 6, 8).

OFF

Module power switch.

GND

OVout

Original output voltage - ARK connector.

GND

OVin

Original nInput voltage - ARK connector.

Potentiometer

Potentiometer to adjust output voltage from 3.3 V to 25 V

Switch

Slider switch for voltage selection: 5 V or set by potentiometer. DFRobot specification

Input voltage: 3.6 V to 25 V
Output voltage: adjustable from 3.3 V to 25 V
Output current: 5 A for 5 V
Maximum output power: 25 W
Switching frequency: 350 kHz
Three different output interfaces:
- ARK connectors
- goldpin
- JST connector raster 2.54 mm
One interface for the original output voltage
Dimensions: 50 x 46 x 20 mm