StarterKit with Raspberry Pi 4B WiFi 8GB RAM + 32GB microSD + official accessories

Description of the set with minicomputer Raspberry Pi 4B

The set consists of a Raspberry Pi model 4B minicomputer with 8 GB of RAM, an official enclosure to protect it against external conditions and an original 5.1V power supply unit with 3.0 A current capacity and a USB plug type C. Accessories such as microHDMI cable, high speed memory card with operating system and Ethernet cable are also included.

L.p. Photo Name 1 Raspberry Pi model 4B 8 GB RAM- popular minicomputer in the latest version with 64-bit 1.8 GHz processor, 8GBRAM and built-in WiFi module Dual Band and Bluetooth 5.0. 2 Original Raspberry Pi power supply- with an output voltage of 5.1 V and current capacity of 3.0 A, equipped with a USB C connector. Sent in a randomly selected color. 3 Theofficial enclosure for Raspberry Pi 4B- has the ability to configure side walls and top flap, gives access to audio, video, microSD card, power and GPIO connectors. 4 MicroHDMI - HDMI- 1 m longcableto connect Raspberry Pi to a monitor. Sent in a randomly selected color. 5 32 GB class 10 microSD card- 32 GB high speed class 10 memory card with NOOBs software. 6 Network cable- Ethernet Patchcord UTP 5e with a length of more than 1 m allows you to create a connection to the Internet. Sent in a randomly selected color.

The video presents the capabilities of the latest Raspberry Pi 4B minicomputer.

What is the Raspberry Pi 4B minicomputer?

Raspberry Pi4B is the latest version of the popular minicomputer. This model stands out:

• high-performance Broadcom BCM2711 processor- quad-core 64-bit ARM-8 Cortex-A72 1.8 GHz,
• two microHDMI connectors- to connect two monitors,
• Two USB 3.0 and two USB 2.0 connectors- provide faster data transfer speeds than in the previous version,
• USB C power connector- allows for current flow up to 3.0 A,
• dual-band WiFi- 2.4 GHz and 5 GHz,
• Bluetooth connectivity- 5 / BLE,
• Ethernet port with a speed of up to 1000 Mbpswith PoE capability.

The rest of the specification is compatible with the earlier3 B+model, i.e. four USB, 40 GPIO, microSD, DSI and CSI connectors and four mounting holes.

The kit is equipped with a 32 GBmicroSD cardstorage medium.

Why choose a set from an official distributor?

To run Raspberry Pi 4 you need a power supply with the following parameters: output voltage over 5 V and current capacity min. 3,0 A. Theoriginal power supply included in the set allows for stable operation of the minicomputerat full load. Thanks to the official raspberry casing it will avoid potential physical damage and accidental short circuits of e.g. GPIO ports. The includedhigh speed 32 GB memory card allows you to install the operating systemas soon as you insert it and connect the minicomputer to the network via Ethernet or WiFi cable. Included accessories such as microHDMI cables allow you to connect the Raspbery Pi to any HDMI enabled monitor.

Specification and comparison of Raspberry Pi 3B+ and 4B 8GB RAM Basic information Model Raspberry Pi 3 model B+ Raspberry Pi 4 Edition 3 - 2018 r. 6 - 2019 r. Technical specification Chipset processor Broadcom BCM2837B0 64-bit Broadcom BCM2711 64-bit Core Quad-Core ARM Cortex-A53 Quad-Core ARM Cortex-A72 Operating systems

Linux Raspberry Pi OS

Windows 10 loT

Linux Raspberry Pi OS

Clocking 1.4 GHz 1.8 GHz Architecture ARMv8-A ARMv8-A Memory RAM 1 GB LPDDR2 @ 900 MHz 8 GB LPDDR4 Memory microSD card microSD card GPIO socket

40-pin connector (2x20 pin)

raster 2.54 mm

40-pin connector (2x20 pin)

raster 2.54 mm

Power supply

• 5.0 V / 2.5 Avia microUSB

• 5 V by GPIO
• PoE withadditional overlay

• 5.0 V / 3 Avia USB C

• 5 V by GPIO
• PoE by means ofadditional overlay

Dimensions of the tiles 85 x 56 x 17 mm 85 x 56 x 17 mm Interfaces USB interface 4x USB 2.0 - socket type A

2x USB 2.0 - socket type A

2x USB 3.0 - socket type A

Network interface 300 Mbps Ethernet port Ethernet port 100/1000 Mbps WiFi interface

Dual Band 2.4 GHz and 5 GHz

802.11 b/g/n/ac

Dual Band 2.4 GHz and 5 GHz

802.11 b/g/n/ac

Bluetooth Low Energy, BLE 4.2 Low Energy, BLE 5 Camera CSI socket CSI socket Touchscreen display DSI socket DSI socket Video

HDMI HD 1080px / 30 fps

H.264 1080p30

OpenGLES 1.1, 2.0

2 x microHDMI

H.265 4K 60 fps

H.264 1080p 30 fps

OpenGLES 1.1, 2.0, 3.0

Communication UART, SLEEPING, I2C, GPIO UART, SLEEPING, I2C, GPIO Useful links

• Raspberry Pi project website
• RPi 4B User Guide
• Raspberry diagram Pi 4B
• Raspberry Pi Cookbook - Simon Monk
• Description of audio/video jack 4pin connector
• How to set up a static IP in Raspbian? - handbook
• Raspberry Pi - system installation instructions
• What is Raspberry Pi?
• CE certified