SRAM X1 1400 BB30 crankset

Quality and durability combine in the SRAM X1 crankset to deliver consistent performance every time out. Featuring SRAM?s X-SYNC? tooth profile, the X1 crankset is engineered for complete chain control. Each tooth?s thickness is CNC machined to work seamlessly with the chain?s inner and outer links. And with five available chainrings, you can personalize your gear range to match the way you ride. Features: - CNC machined 7075, two-tone anodized X-SYNC? chainring?an integral component of the SRAM 1x? drivetrain - X-SYNC? tall, square tooth design provides maximum chain control - Sharp, narrow tooth profile and rounded chamfer edges help manage a deflected chain - Mud-clearing recesses for the inner chain links and rollers - Chainring guard option - Hollow forged aluminum arms with forged aluminum spider - BOOST 148 compatible Specifications: - Arm Material: Hollow forged 6000 series aluminum arms with forged aluminum spider - Chainring Material: CNC machined 7075, two-tone anodize - Weight: 680g (24mm spindle, 175mm, 32t) - Bottom Bracket: BB30, PressFit 30, GXP®, PressFit GXP® - Chainrings: X-SYNC? CNC machined chainrings - Recommended Chain: PC-X1 - Interface: 24mm, 30mm - Technology Highlight(s): X-SYNC?, BB30, PressFit 30, GXP®, PressFit GXP®, BOOST - Options: BOOST 148 Technology: BB30: Besides serious weight savings, this bottom bracket means narrow Q-factor, more ankle clearance, greater bearing durability and stronger crank construction. GXP®: GXP?s Gutter Seal design cuts friction and weight?improving both feel and performance. PressFit: A variant of the external GXP bottom bracket, PressFit cuts weight by up to 40 grams and eases installation by allowing you to press the bearing cups into the frame instead of threading them. It requires no change to the crank spindle length and diameter. Pressfit 30?: This is a new design led by SRAM. it´s all the best from BB30 and Press-Fit bottom brackets in one captivating package. This bottom bracket is designed for 30mm spindle cranksets. The key difference with PressFit 30 is how the bearings are fitted into the frame. Bearings are housed in nylon cups which will be pressed into the frames bottom bracket shell. PressFit 30 will feature an integrated seal, pre-assembled into the cups, to further prolong bearing life. Frames will need a 46mm inner-diameter bottom bracket shell to accommodate this system. PressFit 30 for road will require a 68mm wide shell while PressFit 30 for MTB will require a 73mm wide shell. Advantages: Huge weight savings, narrow Q-factor, more ankle clearance, greater bearing durability, stiffer/stronger crank construction, simple installation. Allows for larger diameter frame tubes increasing frame stiffness. Drawbacks: Still searching. X-SYNC?: SRAM X-SYNC? 1X chain rings provide the highest level of performance and durability. The SRAM X-SYNC? tall square teeth edges engage the chain earlier than traditional triangle shaped teeth. The sharp and narrow tooth profile, as well as rounded chamfer edges, help manage a deflected chain. To provide the best possible performance in muddy conditions, the X-SYNC? chain rings have been designed with mud-clearing recesses for the inner chain links and rollers. Engineered in Germany, X-SYNC? rings are an integral part of the SRAM 1X? drivetrain.