SPEEDBOX Yamaha 3.0 B-Tuning PW-X/SE/TE/CE/X2 Speedbox
Бестселлер
- Артикул:
- 130046217
195 061 AMD
Характеристики
Дизайн
- Цвет
- Черный
Прочие свойства
- Бренд
- SPEEDBOX
Описание
Smart chip of the third generation with the possibility of adjusting the speed limit of your electric bike.The SpeedBox 3.0 tuning chip allows arbitrary configuration of electric speed limiters.
After installing the chip, you can check the actual values such as the maximum speed,.
How does SpeedBox 3.0 work?.
You can activate the SpeedBox 3.0 chip on the screen of the electric bike.
After pressing the LIGHT or ↑↓↑↓ button, the display will briefly show 99 km/h (62 mph) and from then on you are no longer limited.
To turn off the chip, press the LIGHT or ↑↓↑↓ button again.
The display shows 25 km/h (16 mph) and the 25 km/h speed limit will turn back on.
The electric bike works as before the chip was installed.
We are also prepared for electric bikes that do not have a classic control panel with the Walk button.
In this case, simply use the + - + - button combination and SpeedBox will be activated.
In the same way it can be deactivated.
To set the maximum speed, you can change the modes three levels down and then three levels up.
Then the current speed limit will be displayed.
To change the maximum speed, short press the LIGHT button or rotate the wheel 360°.
The last displayed limit is saved after five seconds of inactivity.
average speed, daily mileage and range.
SpeedBox App for SpeedBox 3.0 B.Tuning.
The SpeedBox app designed specifically for the SpeedBox 3.0 B.Tuning uses Bluetooth technology to connect your electric bike to your mobile phone.
After downloading the app and connecting your mobile phone to the bike, you can view the current data and riding parameters on the phone screen.
So you can save information about all your rides, compare with friends and track your own performance.
So you will fully enjoy the ride and leave the parameter check for later.
SpeedBox App Capabilities:.
chip monitoringSave and view ride dataspeed limit settinghidden tuning functionengine lockengine diagnosisThe operation of the SpeedBox 3.0 B.Tuning chip is not conditioned by the use of the SpeedBox App.
However, it is a great accessory thanks to which you will have a complete overview of your performance.
Download the SpeedBox App to your phone before ordering the SpeedBox 3.0 B.Tuning chip.
You will try the demo version, get to know all the features and at the same time make sure that the app works perfectly on your phone.
To connect to the SpeedBox 3.0 B.Tuning chip, your phone must have Bluetooth version 4.0 or higher.
Mounting.
To connect the SpeedBox chip to an electric bike we use colored connectors equipped with a key for proper connection, so the chip is really easy to install.
You can download instructions or watch videos that will guide you to install SpeedBox.
Removing the chip is as easy as mounting it.
If you have any connection problems, please feel free to contact us.
If you want SpeedBox on a new bike, you must first ride at least 1 kilometer on the bike.
You can find detailed information about installing the product here.
Warning.
It must be taken into account that the use of modified electric bicycles in infrastructures may be in conflict with current legislation in some countries.
The manufacturer is not responsible for damages resulting from the use of SpeedBox products.
E-bikes equipped with SpeedBox products may not be used on roads, cycle paths and public areas.
E-bikes equipped with SpeedBox products may only be used on your own property, solely at your own risk.
The use of SpeedBox products may void the warranty of your electric bike.
We recommend the use of additional protection products to avoid injury.
In case of loss of the service password or pin, you can use the Speedbox service.
After installing the chip, you can check the actual values such as the maximum speed,.
How does SpeedBox 3.0 work?.
You can activate the SpeedBox 3.0 chip on the screen of the electric bike.
After pressing the LIGHT or ↑↓↑↓ button, the display will briefly show 99 km/h (62 mph) and from then on you are no longer limited.
To turn off the chip, press the LIGHT or ↑↓↑↓ button again.
The display shows 25 km/h (16 mph) and the 25 km/h speed limit will turn back on.
The electric bike works as before the chip was installed.
We are also prepared for electric bikes that do not have a classic control panel with the Walk button.
In this case, simply use the + - + - button combination and SpeedBox will be activated.
In the same way it can be deactivated.
To set the maximum speed, you can change the modes three levels down and then three levels up.
Then the current speed limit will be displayed.
To change the maximum speed, short press the LIGHT button or rotate the wheel 360°.
The last displayed limit is saved after five seconds of inactivity.
average speed, daily mileage and range.
SpeedBox App for SpeedBox 3.0 B.Tuning.
The SpeedBox app designed specifically for the SpeedBox 3.0 B.Tuning uses Bluetooth technology to connect your electric bike to your mobile phone.
After downloading the app and connecting your mobile phone to the bike, you can view the current data and riding parameters on the phone screen.
So you can save information about all your rides, compare with friends and track your own performance.
So you will fully enjoy the ride and leave the parameter check for later.
SpeedBox App Capabilities:.
chip monitoringSave and view ride dataspeed limit settinghidden tuning functionengine lockengine diagnosisThe operation of the SpeedBox 3.0 B.Tuning chip is not conditioned by the use of the SpeedBox App.
However, it is a great accessory thanks to which you will have a complete overview of your performance.
Download the SpeedBox App to your phone before ordering the SpeedBox 3.0 B.Tuning chip.
You will try the demo version, get to know all the features and at the same time make sure that the app works perfectly on your phone.
To connect to the SpeedBox 3.0 B.Tuning chip, your phone must have Bluetooth version 4.0 or higher.
Mounting.
To connect the SpeedBox chip to an electric bike we use colored connectors equipped with a key for proper connection, so the chip is really easy to install.
You can download instructions or watch videos that will guide you to install SpeedBox.
Removing the chip is as easy as mounting it.
If you have any connection problems, please feel free to contact us.
If you want SpeedBox on a new bike, you must first ride at least 1 kilometer on the bike.
You can find detailed information about installing the product here.
Warning.
It must be taken into account that the use of modified electric bicycles in infrastructures may be in conflict with current legislation in some countries.
The manufacturer is not responsible for damages resulting from the use of SpeedBox products.
E-bikes equipped with SpeedBox products may not be used on roads, cycle paths and public areas.
E-bikes equipped with SpeedBox products may only be used on your own property, solely at your own risk.
The use of SpeedBox products may void the warranty of your electric bike.
We recommend the use of additional protection products to avoid injury.
In case of loss of the service password or pin, you can use the Speedbox service.
