SPEEDBOX Bafang 3.0 3 Pins Speedbox
Бестселлер
- Артикул:
- 108088513
114 188 AMD
Характеристики
Дизайн
- Цвет
- Черный
Прочие свойства
- Бренд
- SPEEDBOX
Описание
Smart product of the third generation with the possibility of adjusting the speed limit of your electric bike.
The SpeedBox 3.0 tuning product allows arbitrary configuration of electric speed limiters.
After installing the tuning you will be able to check the actual values such as maximum speed, average speed, daily mileage and range.
How does SpeedBox 3.0 work?You can activate the SpeedBox 3.0 on the e-bike screen.
After pressing the LIGHT or ↑↓↑↓ button, the display will briefly show 99 km/h (62 mph) and from then on you are no longer limited.
To turn tuning off, press the LIGHT or ↑↓↑↓ button again.
The display shows 25 km/h (16 mph) and the 25 km/h speed limit will turn back on.
The electric bike works as before the tuning was installed.
We are also prepared for electric bikes that do not have a classic control panel with the LIGHT button.
In this case, simply use the + - + - button combination and SpeedBox will be activated.
In the same way it can be deactivated.
To set the maximum speed, you can change the modes three levels down and then three levels up.
Then the current speed limit will be displayed.
To change the maximum speed, short press the LIGHT button or rotate the wheel 360°.
The last displayed limit is saved after five seconds of inactivity.
MountingTo connect the SpeedBox chip to an electric bike we use colored connectors equipped with a key for proper connection, so the chip is really easy to install.
You can download instructions or watch videos that will guide you to install SpeedBox.
Removing the SpeedBox is as easy as mounting it.
If you have any connection problems, please feel free to contact us.
If you want SpeedBox on a new bike, you must first ride at least 1 kilometer on the bike.
You can find detailed information about installing the product here.
WarningIt must be taken into account that the use of modified electric bicycles in infrastructures may be in conflict with current legislation in some countries.
The manufacturer is not responsible for damages resulting from the use of SpeedBox products.
E-bikes equipped with SpeedBox products may not be used on roads, cycle paths and public areas.
E-bikes equipped with SpeedBox products may only be used on your own property, solely at your own risk.
The use of SpeedBox products may void the warranty of your electric bike.
We recommend the use of additional protection products to avoid injury.
The SpeedBox 3.0 tuning product allows arbitrary configuration of electric speed limiters.
After installing the tuning you will be able to check the actual values such as maximum speed, average speed, daily mileage and range.
How does SpeedBox 3.0 work?You can activate the SpeedBox 3.0 on the e-bike screen.
After pressing the LIGHT or ↑↓↑↓ button, the display will briefly show 99 km/h (62 mph) and from then on you are no longer limited.
To turn tuning off, press the LIGHT or ↑↓↑↓ button again.
The display shows 25 km/h (16 mph) and the 25 km/h speed limit will turn back on.
The electric bike works as before the tuning was installed.
We are also prepared for electric bikes that do not have a classic control panel with the LIGHT button.
In this case, simply use the + - + - button combination and SpeedBox will be activated.
In the same way it can be deactivated.
To set the maximum speed, you can change the modes three levels down and then three levels up.
Then the current speed limit will be displayed.
To change the maximum speed, short press the LIGHT button or rotate the wheel 360°.
The last displayed limit is saved after five seconds of inactivity.
MountingTo connect the SpeedBox chip to an electric bike we use colored connectors equipped with a key for proper connection, so the chip is really easy to install.
You can download instructions or watch videos that will guide you to install SpeedBox.
Removing the SpeedBox is as easy as mounting it.
If you have any connection problems, please feel free to contact us.
If you want SpeedBox on a new bike, you must first ride at least 1 kilometer on the bike.
You can find detailed information about installing the product here.
WarningIt must be taken into account that the use of modified electric bicycles in infrastructures may be in conflict with current legislation in some countries.
The manufacturer is not responsible for damages resulting from the use of SpeedBox products.
E-bikes equipped with SpeedBox products may not be used on roads, cycle paths and public areas.
E-bikes equipped with SpeedBox products may only be used on your own property, solely at your own risk.
The use of SpeedBox products may void the warranty of your electric bike.
We recommend the use of additional protection products to avoid injury.
