SparkFun Qwiic pHAT v2.0 - hat for Raspberry Pi - SparkFun DEV-15945

SparkFun Qwiic pHAT v2.0 HAT shield for Raspberry Pi, manufactured by SparkFun. The pin expander improves the prototyping process by adding four connectors of the Qwiic ecosystem and a screw connector for power connection. Two ports are placed vertically in relation to the board, and two horizontally . The extension is compatible with any Raspberry Pi that uses the standard 2x20 GPIO header, as well as with NVIDIA Jetson Nano and Google Coral.

• SparkFun Qwiic pHAT v2.0 - Qwiic shield for Raspberry Pi - SparkFun DEV-15945 - 1 piece

Example of using SparkFun Qwiic pHAT v2.0 with Raspberry Pi 4B. The subject of the sale is only the overlay - the module must be purchased separately.

Qwiic SparkFun is an ecosystem that includes a wide range of sensors based on the I2C bus, executive modules and dedicated cables. The main assumption of this solution is to improve the process of prototyping and connecting components. All elements supporting the Qwiic standard use the same connector - a 4-pin JST connector with a spacing of 1 mm. The use of such a solution reduces the amount of space required on the printed circuit board and prevents connection contrary to the polarity.

• Type: Raspberry Pi extension, HAT for Raspberry Pi
• Compatible model: Raspberry Pi with 2x20 connectors, NVIDIA Jetson Nano, Google Coral
• Connector standard: Qwiic
• Qwiic ports: 4
• Arrangement: 2x vertically, 2x horizontally
• Auxiliary power connector: 5V screw connector
• 1x general purpose button
• Communication interface: I2C bus
• Overlay dimensions: 65 x 30.5 mm

SparkFun Qwiic pHAT v2.0 - extension to the Raspberry Pi.

• Manufacturer's website: SparkFun DEV-15945
• User Guide
• Layout diagram
• EagleCAD files
• Tile dimensions
• Qwiic information page
• GitHub hardware repository