Simply Robotics Motor Driver Board - motor driver - for Raspberry Pi Pico - Kitronik 5348

It imposes on the Raspberry Pi Pico extending the functionality of the module with the ability to control servos and motors. It allows you to simultaneously control 8 servos and 2 brush motors (or 1 stepper motor). The maximum load per channel is 1 A , which is why Simply Robotics Motor Driver Board is used in amateur hobby projects and toy prototypes.

Simply Robotics Motor Driver Board - motor driver - for Raspberry Pi Pico - Kitronik 5348.

There is also a Raspberry Pi Pico socket on the board.

• Compatible with Raspberry Pi Pico
• Enables simultaneous control of 8 servos and 2 brush motors (or 1 stepper motor)
• It offers the user many IO pins through which unusual projects can be implemented
• The board has 3-pin connectors for connecting servos, 5 GPIO pins, (including analog inputs on Pico), which allow you to connect additional peripherals
• Power is supplied through a screw connector, the board also has an ON / OFF slider and an LED indicating the power status
• The board supplies power to all connected servos and provides the connected Raspberry Pi Pico with regulated 3V power
• The module is protected against reverse polarity

1. screw connection
2. Power status LED
3. GPIO pins
4. Raspberry Pi Pico socket
5. Pins for connecting servos
6. Screw connections for connecting motors
7. ON/OFF slider

Arrangement of components on the board.

Simply Robotics Motor Driver Board from Kitronik.

• Type: shield for Raspberry Pi Pico
• Overlay type: motor driver
• Number of supported motors: 8 servos and 2 brush motors / 1 stepper motor
• Operating voltage: 3V to 12V (4.5V to 6V recommended)
• Maximum load: up to 1 A per channel
• Board dimensions: 63 x 42 x 10 mm
• Mounting hole diameter: 3.3mm (M3)

• Motor driver - for Raspberry Pi Pico - Kitronik 5348

• Manufacturer's website: Kitronik 5348
• User Guide
• GitHub repository