Servo - micro - 180 degree - crocodile - Kitronik 25105

Kitronik servo based on the FeetechFS90MG-CL withmetal gearbox. Powered from 4.8V to 6V, torque is from 1.8 kg*cm to 2.2 kg*cm, movement range up to 180°. The cables are terminated withcrocodile connectors.If a servo will be used in projects with amicro:bitboard, a separate power source or KitronikKlip Motor Drivershould be used to power it.

The servo can be programmed using MakeCodeor Python,whichare ideal for newcomers and micro:bit professionals. A set of four taps is also included.

The servo has a 3-pin cable with crocodile connectors. It is powered from 4.8 V to 6 V.

Colored crocodile connectors.

• The servo has standard 3-pin connectors in the form of crocodile connectors.
• Small dimensions with high torque: 1.8 kg*cm at 4.8 V and 2.2 kg*cm at 6 V.
• Metal gearbox.
• Programmable in MakeCode and Python.
• Can be used in RC models and robotics.
• 180° movement range.
• Supply voltage: 4.8 V to 6 V.

Set contents.

• Supply voltage: 4.8 V to 6 V
• Operating parameters for 4.8 V:
  • current consumption at rest (idle): 5 mA
  • no-load current consumption: 190 mA
  • current consumption when the shaft is stopped: 700 mA
  • speed: 10 s/60°
  • moment: 1.8 kg*cm
• Operating parameters for 6 V:
  • current consumption Idle: 6 mA
  • no-load current consumption: 220 mA
  • current consumption at stopped shaft: 800 mA
  • speed: 9 s/60°
  • moment: 2.2 kg*cm
• Metal cogs
• Enclosure: ABS
• Scope: 180°

• Dimensions: 32.3 x 30.7 x 12.1 mm
• Cable length: 250 mm
• Length of crocodile connector: 34 mm
• Weight: 12,5 g

• The manufacturer's website: Kitronik 25105
• Documentation
• Dimensions