Spartan Edge Accelerator Board - Arduino FPGA shield with ESP32
- Артикул:
- 42763077
Характеристики
- UC - I2C
- yes
- UC - USB
- USB C
- UC - WiFi
- yes
- UC - UART
- yes
- UC - HDMI
- yes
- UC - ядро
- 1. Single Core
- UC - Разъем
- USB typ C
- UC - microSD
- yes
- Напряжение до
- 5.0 V
- UC - Bluetooth
- yes
- Интерфейс UC - SPI
- yes
- Интерфейс UC - LCD
- Нет
- UC - Внешняя память
- microSD card
- Интерфейс UC - камеры
- yes
Общие характеристики
- Напряжение от
- 17.0 V
Прочие свойства
- EAN
- 5904422324469
- Бренд
- SeeedStudio
Свойства
- Тип
- Материнские платы для микрокомпьютеров, Запчасть для микрокомпьютера
Энергопитание
- Номинальное напряжение
- 5 V
Описание
Overlay for Arduino extending the module with FPGA functionswith Xilinx Spartan.On the board there is alsoESP32chip enabling communication viaWiFi and Bluetooth, as well as 8-bit ADC, 6-axis accelerometer and gyroscope, two RGB diodes, miniHDMI, twoCSIcamera connectors and Grove interface.The module can also work as an independent device.
Spartan Edge Accelerator Board is based onXilinix Spartan-7 XCS7S15 FPGAchip with a clock clock clocked at 100 MHz, has 360 kB of RAM memory. It is equipped with 10 I/O pins, which include such interfaces as PWM, I2C, I2S, UART, SPI. The ESP32 supports 2.4 GHz 802.11 b/g/n WiFi communication and Bluetooth 4.1 BLE. The manufacturer prepared ArduinoFPGA API forsimple FPGA control by Arduino IDE. The module can be powered by 5V from USB type C, through VIN connectors from 8V to 17V or from Arduino 5V.
Main features of Spartan Edge Accelerator Board module- Fast image processing:
- Works with Raspberry Pi Camera v1.0 (OV5640)
- supports a maximum number of cages of 30 fps
- Encrypted IoT:
- Works with cloud services (AWS, Azure, etc.)
- supports a software encryption algorithm
- Many I/O outputs
- 20 I/O (as a standalone FPGA device)
- 10 I/O (as an overlay for Arduino)
- Expandable with Arduino compatible connectors
- Target users:
- IoT developers
- Arduino developers
- FPGA developers
2x monochromatic
2x RGB
Buttons1x Boot
1x Reset
1x FPGA Reset
2x user programmable
Switches1x power mode switch
1x 5-channel DIP switch
Power supply Working voltage 5 V I/O port voltage 5 V Power modesUSB type C: 5 V
VIN: 8 V to 17 V
From Arduino level: 5 V
Other ADC 8-bit ADC1173 Accelerometer and gyroscope 6-axis LSM6DS3TR The set includes- Spartan Edge Accelerator Board
- Set of connectors
- The manufacturer's website: Seeedstudio 102030005
- User guide
- Spartan-7 system documentation
- ESP32 documentation
- Eagle files
- VHDL course - blog