Grove - Pi+ StarterKit for Raspberry Pi 4B/3B+/3B/2B

Description

Starter set introducing to the world, IoT (Internet of Things) for the Raspberry Pi. The set includes i.a.: sensors of light, sound, temperature, relay, display and many others. Connecting modules facilitates special cap GrovePi+ with wires. The kit includes an illustrated manual instruction.

 

 

 

The set is sent in a plastic box.

 

The set consists of: L. p. Photo Description 1 GrovePi+ - a cap tothe Raspberry Pito connect the sensor using the supplied cables. 3 Illustrated user manualin English, with exemplary programs. 3 Module with button - board with button tact switch and resistorlifted to mass. Communication is a digital signal 0/1. 4 Module with light sensor- a sensor measures the ambient light intensity. Based on the LM358 circuit. 5 Module with buzzer - simple sound signal generator. 6 Module with sound sensor- used to detect the sound level of the environment. Has an analog output. Microphone sensitivity at 1 kHz is 48 to 52 dB. 7 3 modules with LED diode (included colors: blue, red and green) - has a built in resistor that limits the current on the diode, can be operated by PWM signal. 8

LCD display with RGB backlight- screen withbacklight, full color palette. Communicates with the microcontroller via I2C interface. Has built-in english and japanese fonts.

9 Module with linear potentiometer -module with a range of 300° and a linear change of value. The resistance is 10kΩ. 10 Module with sensor of temperature and humidity -can measure temperature in the range from 0 to 50 °C and humidity in range from 20 to 90 % RH. 11 Module with ultrasonic distance sensor- detects objects at a distance of 3 cm to 400 cm with accuracy of 1 cm. 12 Module with relay- maximum supported voltage of 250V AC and a maximum current of 15 A. For safety, work with voltages up to 24 V. Useful links

• The official site of the manufacturer - Seeedstudio 110060161
• The software on GitHub
• Site GrovePi on the dexterindustries.com
• User forum GrovePi