Характеристики
- UC - USB
- USB C
- UC - ядро
- ARM Cortex-M0+, 2. Dual Core
- UC - Разъем
- USB typ C
- UC - Вспышка
- 2048 kB
- UC - Микроконтроллер
- RP2040
Общие характеристики
- UC - PWM
- 11
- UC - аналог в
- 4
- UC - Цифровые контакты
- 11
Прочие свойства
- EAN
- 5904422379834
- Бренд
- SeeedStudio
Описание
A small board with a very powerful Raspberry Pi RP2040 microcontroller. Xiao RP2040 module was manufactured by Seeedstudio. The MCU with dual-core ARM Cortex M0+ clocked at 133 MHz can be programmed in Arduino, MicroPython and CircuitPython. The board is equipped with interfaces to create multiple applications. Xiao RP2040 is another board from the Xiao series. Like the Xiao Seeeduino, it is compact and contains many interfaces. The module is equipped with the same chip as the Raspberry Pi Pico and Arduino RP2040, 264 kB SRAM and 2 MB of built-in flash memory and can be programmed in C/C++ and MicroPython. The Seeed Xiao RP2040 is equipped with 11 digital pins, 4 analog pins, 11 PWM pins, I2C, UART and SPI interfaces. The Xiao is programmed via USB type C interface. In addition, the board features a Rest and Boot button, one programmable RGB LED, a power LED, two status LEDs, and one free-form LED.
- Powerful microcontroller: dual-core ARM Cortex M0+ clocked at 133 MHz
- Rich resources: 264 kB SRAM and 2 MB flash memory
- Broad compatibility: supports MicroPython / Arduino / CircuitPython
- Easy to design: works with contact boards, SMD design, no components on backside of board
- Small size: thumb-sized board (20 x 17.5 mm)
- Multiple interfaces: 11 digital pins, 4 analog pins, 11 PWM pins, 1 I2C interface, 1 UART interface, 1 SPI interface, 1 SWD pad
- Compatibility: all pins are compatible with Seeeduino Xiao and Seeeduino Xiao Expansion Board
All pins of the Xiao RP2040 module operate at 3.3 V, applying higher voltage may permanently damage the chip.
- Clothing devices
- Rapid prototyping (can be directly plugged into a contact board)
- Ideal for projects requiring a mini Arduino
- DIY keyboard
- Microcontroller: Raspberry Pi RP2040 Dual-Core ARM Cortex M0+ 133 MHz
- Memory: 256 kB SRAM, 2 MB Flash
- I/O pins: 11 digital, 4 analog, 11 PWM
- Interfaces: 1 I2C, 1 UART, 1 SPI, 1 SWD
- Power and programming: USB type C
- LEDs: 1 general purpose LED, 1 power LED, two serial port LEDs, 1 RGB LED
- Buttons: Reset, Boot
- Power pads: for battery power
- Software Compatibility: MicroPython / Arduino / CicruitPython
- Dimensions: 20 x 17.5 x 3.5 mm
- Manufacturer's website: Seeedstudio 102010428
- Seeed Studio XIAO Series - user manual
- User guide
- RP2040 Documentation
- Xiao RP2040 schematic diagram
- Reference design
- Case studies