SALEWA Litetrek Pro III Tent

The Litetrek Pro III is a 3-person, double wall tent, designed for lightweight trekking in alpine terrain, where protection against severe weather, wind stability, light weight and compact pack size are key. Its three-season spec is optimised for use during the milder months of the year. Wind-tunnel tested for stability at 90 km/h by the Technical University of Munich. Its robust, reliable semi-geodesic, double wall construction enables full use of space and ensures an optimal balance of weather protection and ventilation. The 100% self-supporting design means that you can pitch without problem on rocky terrain, or at alpine sites where there is not enough space to set up with guy lines and pegs. Alternatively, the anchor points can be extended for more flexibility, for example on snowy terrain. Its tear-resistant 20D ripstop nylon flysheet is silicone- and PU-coated to give it a 3,000 mm water column, the floor is made of robust PU-coated 70D ripstop nylon that gives a 10,000 mm water column, while the 66D ripstop polyester inner tent has a mesh and mosquito net entrance. Ventilation is regulated via a rear panel with zippers (which can be operated from both inside and outside) allowing you to adjust the fresh air supply and prevent humidity. In addition, our 3S Speed Set Up Solution with short, flat sleeves and hooks allows you to set up fast and effectively in one pitch. And in good weather or on fine nights, you can go minimalist and pitch the flysheet on its own. What really sets the Litetrek Pro III apart is its versatility check out the weatherproof vestibule for gear storage and cooking, which is integrated into the inner tent, or can be extended as required. Features: - Repair set - Extended guy line webbing: Transfers force from webbing stitching to pole construction for increased durability and stability - Footprint available - Different door opening options - Zipper with anti-catch flap - Nylon hooks for fixing the fly even in cold conditions - Extendable and replaceable anchor points: Anchor points can be extended using longer cord for more flexibility in rocky or snowy terrain - Cord locks: For efficient guy line organization - Reinforced Hypalon sleeve finishing - Vestibule extension solution: Easy-to-use interior buckles to extend vestibule as required - 100% Self supporting construction: Offers a huge benefit on rocky terrain or areas where there is not enough space to set up with guy lines and pegs. With improved stability and the vestibule already pitched due to the pole construction. Specifications: - Packing Size: 40 x 19cm - Ventilations: 1 - Entrances: 1 - Persons: 3 Persons - Area Vestibules Front: 0.74m² - Minimal Trail Weight: 2.10kg - Area Inner Tent: 3.47m² - Height Inner Tent: 1.07m - Kind of ventilation: Ventilation panel with zippers - Vestibules: 1 - Poles: 7001 T6 ultralight Aluminium - Tent construction: Semi geodesic double wall - Guy lines quantity: 4 - Pole quantity: 3 - Guy lines: Reflective Dyneema - Pegs quantity: 10 - Pegs: Y-Pegs Aluminium 14,5 cm - Watercolumn Fly: 3,000mm - Watercolumn Floor: 10,000mm - Pole diameter: 8.5mm - Floor: 20D Nylon Ripstop with mesh and mosquito net entrance - Floor: 40D Nylon Ripstop - Floor: PU Coated - Fly: 20D Nylon Ripstop - Fly: silicone/PU coated - Wind Protection: Minimum 90 km/h windspeed approved in the windchannel of Technical University of Munich