Case Raspberry Pi 3B+/3B/2B for DIN rail

Бестселлер
47398520
8 669 AMD
  • Бренд RS
  • Доставка из Польши
  • Курьер DHL 3 июня
  • Стоимость доставки заказа в Армению от 72 206 AMD

Сроки доставки указаны ориентировочно и зависят от региона доставки. Подробнее на этой странице

Характеристики

Корпус - модуль
Raspberry Pi 3/2/B+
Корпус - Экранное пространство
yes

Общие характеристики

Случай - Доступ к GPIO
yes
Корпус - Для DIN-рейки
yes

Производительность

Цвет
Белый

Прочие свойства

Бренд
RS

Описание

Product description: Raspberry Pi 3B+/3B/2B DIN rail enclosure

Plastic enclosure for Raspberry Pi minicomputer version 3 B+, 3B, 2B and 1B+ mounted on DIN rail. External dimensions are 90 x 72 x 63 mm. The enclosure is mounted with snaps and screws which allows it to be disassembled at any time. There is enough space inside for mounting any GPIO extension board.

The enclosure has enough space for GPIO extensions.

Housing Specifications
  • Colour: grey
  • Housing compatible with Raspberry Pi 3B+/3B/2B
  • Transparent flap included
  • DIN rail mountable
  • Material: ABS, 2 mm thick polycarbonate
  • External dimensions: 90 x 72 x 63 mm
Raspberry Pi 3B+/3B/2B DIN rail enclosure

One of the primary purposes of using this type of housing is to protect sensitive electronic devices from any contaminants such as dust, sand, insects or moisture. The product shown in the picture comes with a flap sealing external access to the equipment inside. It is made of transparent material so that the user can easily visually inspect the electronic equipment inside without having to open the case.

Raspberry Pi minicomputers are often used as a key logic element in a smart building system. It is not uncommon to use dedicated board extensions, which are mounted and connected to the device via GPIO connectors, to enhance the capabilities of the device. The offered enclosure is designed in such a way that a Raspberry Pi minicomputer in 3B+, 3B or 2B versions along with an extension can easily fit inside.

DIN rail enclosure

The enclosure is made of high quality ABS material and 2mm thick polycarbonate. The product was designed and made to fulfill its function for many years. High demands on the quality of materials and strict standards maintained during production and quality control make it a high-class product.

The plastic enclosure can be easily placed on a DIN rail, making it ideal for use in factories as well as in home control cabinets. Mounting the housing on the minicomputer is very simple, fast and intuitive. It is based on snaps and the use of included screws - if necessary, it is just as easy to remove such an enclosure from the device.