Регулятор напряжения ZTW 3-14S UBEC 12A

Regulator (BEC) 12A (18A temporarily) to power the receiver and servos in the RC model. Especially recommended for:

• models with electric drive based on the OPTO regulator (without BEC)
• models of gliders or combustion airplanes in which the Ni-xx package consisting of 4 or 5 cells is replaced with a 7.4V li-po package
• electric models in which the speed controller has too weak BEC (the model has a lot of servos or high-power servos)

Thanks to the use of a modern electronic system and a ferrite ring on the power output cable, the risk of interference has been minimized.

The ZTW UBEC 12A regulator connected to the 7-60V power pack (drive) reduces and stabilizes the voltage at the level of 5.0, 5.5, 6.0, 6.5, 7.0 or 8.0V (selectable via a microswitch), which can be used to power the receiver, servos , gyroscope, etc. when we do not have a BEC and we do not want an additional 4.8V or 6V package, and when the BEC integrated (built-in) with the speed controller is too weak to handle a larger number of servos and other components.

In the case of combustion models, it can be used as a voltage reducer when using li-ion or li-pol 2S packages. The obvious advantage is the large capacity of such a package and low weight (li-pol).

The LEDs indicate the currently selected output voltage.