Print glue Magigoo Original - 50ml

Magigoo Original printing adhesive - 50 ml is a preparation improving the adhesion of the first layers of the 3D print , thanks to which there is no deformation during printing and the printed object tightly adheres to the printer's worktop. The adhesive, thanks to its composition, strongly binds the printout to the table top, when it is heated, while when it is cooled down, the binding properties of the preparation decrease, thanks to which you can easily detach the finished print from the table. In addition, glue residues are extremely easy to wash off.

Magigoo Original printing adhesive - 50 ml.

Magigoo Original printing adhesive.

• Can be used for filaments: ABS, PLA, PETG, HIPS, ASA, TPU.
• Easy to apply
• Easy to clean
• Odorless
• Non-toxic

• Shake the bottle.
• Apply the preparation on the printer's worktop by pressing the tip on the printer's worktop.
• Print as recommended by the filament / printer manufacturer.
• Leave to cool and remove. The print should pop off immediately.
• Use a damp cloth to clean the worktop from residual glue.

• Filament glue:
  • ABS
  • PLA
  • PETG
  • HIPS
  • ASA
  • TPU
• Package capacity: 50 ml
• Temperature for the best adhesion:
  • PLA: from 50 ° C to 70 ° C - open chamber
  • PET-G: from 60 ° C to 90 ° C - open chamber
  • ABS: from 80 ° C to 110 ° C - closed chamber
  • HIPS: from 80 ° C to 110 ° C - closed chamber

Magigoo Original - 50 ml

• Manufacturer's website