Pino-Tech SoilWatch 10 - analog soil moisture sensor corrosion resistant - 10m

Sensor is used to determine the level ofsoil moisture . It is powered from 3.1V to 5V. The output is an analogue voltage. In construction of the sensor there are no visible electrodes, so it is resistant to corrosion and the readings will not lose their accuracy with time. The sensor has protections such as water resistance and weather resistance. Module can be connected to Arduino and other boards equippedwith A/D converter.

• Accurate
• Easy to use
• 75 MHz capacitive sensor
• Waterproof and weatherproof
• Longer lifetime than resistance moisture sensors

• Irrigation management
• Soil moisture monitoring

• Brown wire: supply voltage VCC +
• Black wire: GND
• White wire: Output

• Supply voltage: from 3.1 V to 5 V
• Output voltage: from 0 V to 3 V
• Maximum current: approx. 24 mA
• Temperature drift: typically less than 5 mV
• Operation temperature: from 2 °C to 45 °C
• Dimensions: 170 x 25 x 15 mm
• Weight: 52 g
• Cable length: 10 m

• Documentation
• Sample Arduino program