RGB LED strip WS2813 - digital, addressed - IP65 60LED/m, 18W/m, 5V - 5m
Бестселлер
- Артикул:
- 43303576
31 083 AMD
Характеристики
- Напряжение до
- 5.0 V
- Напряжение от
- 5.0 V
- светодиодный тип
- SMD5050
- LED - светодиоды
- 60 per meter
- Класс герметичности
- IP65
- Светодиодный объектив
- Четкий
- Светодиодно - цифровой
- yes
- Длина волны светодиода
- RGB
- Светодиодный - цветной
- RGB
Дизайн
- Длина кабеля
- 5.0 m
Прочие свойства
- Бренд
- OEM
Энергопитание
- Номинальная мощность
- 18 W
- Номинальное напряжение
- 5 V
Описание
Description
Individually addressed RGB LEDs placed on a 5 m panel with a density of 60 LEDs per meter. Each pixel can emit a color from 24-bit palette.
The LEDs are arranged densely, at a distance of about 11 mm, and thanks to this the brightness is really high. The system is supplied with the voltage of 5 V, consumes approx. 3.6 A at every meter (18W). It is possible to cut the strip every one diode.
ConnectionThe device has a 3-pin connector consisting of the following outputs:
- GND (white wire)- module's ground
- 5 V (red wire)- voltage supply, for one matrix you should connect the source with maximum load current of at least 3.5 A at each meter
- D0 (green wire - data)- digital control signal from the microcontroller
- B0 (blue wire - clock)digital control signal from the microcontroller - connected depending on the program requirements
The product is compatible with Arduino and Raspberry Pi
- The Arduino library in GitHubfor modules NeoPixel along withthe connection examples,
- connection examplewith a Raspberry Pi together with the code.
First run - example ColorPalette
- Run the test by choosing in the Arduino environment:
- File -> Examples -> FastLED -> ColorPalette
- Select the pin which will control the LEDs. By default pin 5:
- Line 3#define PIN 5
- Select the number of pixels that must be controlled. By default this is 50:
-
- Line 4#define NUM_LEDS 50
- Select the brightness of LEDs, by default 64:
- Line 5#define BRIGHTNESS 64
- Select the type of LED driver, by default WS2811
- Line 6#define LED_TYPE WS2811
- Load a program into Arduino. Pixels should turn on and change the color from the color palette.
- Supply voltage: 5 V
- Power: 18 W/m
- LEDs used in the LED-RGB-SMD5050 WS2813
- Addressed pixel: 1 led RGB
- Resistance to external conditions: IP65 (silicone cover)
- Width: 10 mm
- Strip length: 5 m
- Arduino library in GitHub