Lipol charger TP4056 1S 3,7V microUSB with protection

Description:Li-Pol TP4056 charger TP4056 single 1S 3.7V microUSB cell with protections

Simple charger for 1-purposelithium-polymerbatteries with a nominal voltage of 3.7V. Maximum charging current is 1000 mA. The system is powered via the microUSB connector or via wires connected to the IN+ and IN- inputs. The module is protected against excessive discharge below 2.5 V and excessive current consumption above 3 A.

Outputs

The module has 6 solder fields and a microUSB connector.

Pin Description IN+ Supply voltage from 4.5 V to 5.5 V. IN- The weight of the system. BAT+, BAT- Connectors for connecting Lipol 3.7 V batteries. OUT+, OUT- Connections for connectionpowered. When too low a battery voltage is detected, the system switches the power supply from BAT connectors toIN. Specification

• Layout: TP4056
• Power supply voltage: (microUSB or IN connectors) from 4.5 V to 5.5 V
• Charging voltage: 4,2 V
• Maximum charging current: 1 A
• Socket: microUSB(microUSB cablecan be purchased separately)
• Two signal lights
  • Red: charging
  • Green: full charge
• Protection against discharge below 2.5 V
• Protection against current consumption over 3 A
• Module dimensions 26 x 18 mm

Attention!

Before connecting the battery, check the polarity of the plug.

Useful links

• Documentation TP4056