LED RGB Ring WS2812B 5050 x 24 diodes - 68mm

Бестселлер
73734477
3 986 AMD
  • Бренд OEM
  • Доставка из Польши
  • Курьер DHL 30 мая
  • Стоимость доставки заказа в Армению от 141 755 AMD

Сроки доставки указаны ориентировочно и зависят от региона доставки. Подробнее на этой странице

Характеристики

Напряжение до
5.0 V
Напряжение от
5.0 V
светодиодный тип
WS2812B
Светодиодный объектив
Четкий
Светодиодно - цифровой
yes
Длина волны светодиода
RGB
Светодиодный - цветной
RGB

Общие характеристики

LED - светодиоды
16

Прочие свойства

Бренд
OEM

Энергопитание

Номинальная мощность
1.2 W
Номинальное напряжение
5 V

Описание

Description of LED RGB Ring WS2812B 5050 x 24 diodes - 68 mm

The ring consists of 16 individually addressed RGB LEDs with integrated controller. The module needs single pin of the microcontroller, e.g. an Arduino. The LEDs are arranged at equal distances on the circumference with an outer diameter of 68 mm. Each of them consumes a current of 18 mA, which in this case gives a total value of approx. 290 mA. The ring can be powered with a voltage of 5 V.

 

The used communication Protocol allows the serial connection of the LEDs. Another circuit should be connected to the output connector, combining with each other respectively, 5V, GND and OUT with IN. The manufacturer notes that when working with more than 500 LEDs, there may not be enough RAM in the Arduino Uno system.

 

Connection The device has four terminals:
  • GND - module's ground
  • VCC supply voltage 18 mA current for one diode
  • IN the digital control signal from the microcontroller
  • OUT - output to connect the next ring

 

The product is compatible with Arduino and Raspberry Pi

The product works with the NeoPixel library from Adafruit:

  • Arduino library in GitHub along with examples of the connection,
  • connection example with a Raspberry Pi together with the code.

 

In our offer there are alsorings in other sizes.

 

Specification: LED RGB Ring WS2812B 5050 x 24 diodes - 68mm
  • Supply voltage: 5 V
  • Current consumption: 18 mA for a single diode
  • Applicable light: LED RGB WS2812B (documentation)
  • Number of LEDs: 16
  • Outer circle diameter: 68 mm

 

Useful links
  • Arduino library in GitHub
  • Example of connecting to the Raspberry Pi
  • An example of a project in Adafruit
  • Documentation LEDs WS2812B