Electronic components set E24 + breadboard 400 - E24 - 235 elements

Description

The set of prototype elements that can be used for creating the electronic systems with Arduino. The kit includes: a breadboard, the power module for the breadboard, sets of wires, Tact Switch  buttons, LEDs, transistors, capacitors, resistors and a table that facilitates detection of resistors, and many more. All closed in a small container.

The set consists of:

 

L. p. Photo Description 1

Breadboard 400 holes- 1 PC.

Used for rapid creation of prototype systems.

2

The power module for the breadboard - 1 PC.

Power module for breadboard, allows connection of power supply 5 V or 3.3 V using the AC adapter.

3

Passive buzzer- 1 PC.

Buzzer without generator of continuous tone. Allows you to add the sound signal.

4

Active buzzer- 1 PC.

Buzzer with continuous tone generator. Allows you to add the sound signal. In active buzzer, you only have to indicate the low state on its leg so he'd made a sound.

5

Accurate potentiometer- 1pc

Can be used as a knob in the user interface.

6

The system of the shift register 74HC595N- 1 PC.

7 Optocoupler4N35 - 1 PC. 8

Electrolytic capacitor100 uF / 50V - 5 pcs.

Passive electricelement, characterized by the ability to accumulate the electric charge used in filtering the power, as well as to create voltage regulators. It has a capacity of 100 µf / 50 V.

9

Electrolytic capacitor10 uF / 50 V - 5.

Passive electricelement, characterized by the ability to accumulate electric charge used in filtering the power, as well as to create voltage regulators. It has a capacitance of 10 µf / 50 V.

10

NPN transistor PN2222- 5 PCs.

Transistors are able to amplify electric signal. Maximum voltage is 40 V, maximum current is 1 A.

11

Rectifier diode 1N4007- 5 PCs.

Is used for rectifying the current.

12

Photoresistor - 2 PCs.

The sensor which is influenced by the intensity of the incident light, changes the resistance.

13

Tact Switch Button 10 PCs

Amonostable, small button mounted in a through hole way THT. Its dimensions are 5 x 5 mm, height 8 mm.

14

Thermistor, 1 PC.

Temperature sensors. When the temperature increases, the resistance decreases.

15

Led RGB- 1 PC.

Led emitting colors from an RGB palette.

16

Goldpin strip 1x40- 2 PCs.

17

Male-to-malewires - 65 PCs.

18 Female-male wires - 10 pieces 19

Ceramic capacitor104 - 10 pcs.

Passive electricelement characterized by the ability to accumulate electric charge used in filtering of power, as well as to create voltage regulators. Has a capacity of 100 NF.

20

Ceramic capacitor 22 pf - 10 pcs.

Passive electric element characterized by the ability to accumulate electric charge used in filtering of power, as well as to create voltage regulators. Has a capacity of 22 PF.

21

Red led - 10 PCs.

Led emitting light in red.

22

Green led- 10 PCs.

The led that emits light in green color.

23

Yellow led- 10 PCs

Led emitting light in yellow.

24

Blue led- 10 PCs

The led that emits light in blue.

25

White led- 10 PCs.

The led that emits light in white color.

26

Resistor10Ω - 10 PCs.

Passiveelectric element used to limit the current of an electric circuit.

27

Resistor100Ω - 10 PCs.

Passive electric element used to limit the current of an electric circuit.

28

Resistor220Ω - 10 PCs.

Passive electric element used to limit the current of an electric circuit.

29

Resistor330Ω - 10 PCs.

Passive electric element used to limit the current of an electric circuit.

30

Resistor1 kΩ - 10 PCs.

Passive electric element used to limit the current of an electric circuit.

31

Resistor2kΩ - 10 PCs.

Passive electric element used to limit the current of an electric circuit.

32

Resistor 5.1 kΩ - 10 PCs.Passive electric element used to limit the current of an electric circuit.

33

Resistor10kΩ - 10 PCs.

Passive electric element used to limit the current of an electric circuit.

34

Resistor100kΩ - 10 PCs.

Passive electric element used to limit the current of an electric circuit.

35

Resistor1 MΩ - 10 PCs.

Passive electric element used to limit the current of an electric circuit.

36

Card with the legend of colors of resistor - 1 PC.

Card to facilitate the distinction of the resistance of the resistors based on the colored bars on their body.

37 Plastic container.