Elastic matrix 8x32 - 256 RGB LED RGB - WS2812B individually addressed
- Артикул:
- 53916924
Характеристики
- Напряжение до
- 5.0 V
- Напряжение от
- 5.0 V
- Светодиодный объектив
- Четкий
- Светодиодно - цифровой
- yes
- Длина волны светодиода
- RGB
- Светодиодный - цветной
- RGB
Общие характеристики
- светодиодный тип
- WS2812B
- LED - светодиоды
- 256
Прочие свойства
- Бренд
- OEM
Технические характеристики
- Номинальная мощность
- 25 Вт
Экран
- Тип экрана
- Matryca LED
- Сенсорный экран
- Нет
- Диагональ экрана
- 1.3'', 1.3''
- Разрешение экрана
- 8x32 px
Энергопитание
- Номинальное напряжение
- 5 V
Описание
The matrix consists of 256 RGB LEDs, each of which can be controlled separately to display a colour from a 24-bit palette. The elements are evenly distributed in eight rows and thirty-two columns. Only one pin of any microcontroller (e.g.Arduino) is needed to operate the module. The system is powered by 5 V, it consumes maximum 60 mA for each diode (at white).
The matrix is made of a flexible material, which enables bending. In our offer there are also matrices with other dimensions available (in the picture a matrix 8 x 32 RGB LED). The product cooperates withNeoPixellibrariesfor Arduino.
The applied communication protocol enables serial connection of the dies. Another NeoMatrix should be connected to the output connector, connecting 5 V, GND and DOUT with DIN respectively. The manufacturer points out that when using four or more matrices, the Arduino Uno RAM may not be sufficient. It should also be noted that each subsequent matrix will require an increase in power supply performance.
ConnectionThe device has a 3-pin connector consisting of the following leads:
- GND- module weight
- 5 V- supply voltage, current consumption of one diode is maximum 60 mA, which at 256 diodes gives about 15 A
- DIN- digital control signal from a microcontroller
Arduino compatible product
Manufacturer makes availableArduino library in GitHub servicefor NeoPixel modules together withconnection examples.
8x32 flexible matrix specification- Power supply voltage: 5 V
- Current consumption: maximum 60 mA for one diode, white
- LEDs used: RGB LED WS2812B
- Dimensions: 320 x 79 x 2 mm
- Weight: 55 g
- Arduino library at GitHub
- Adafruit user guide
